Skip to main content
Infineon Technologies S25FL164K0XNFI013 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL164K0XNFI013 NOR Flash 64 Mbit SPI Quad I/O Obsolete

MPNS25FL164K0XNFI013
Obsolete

Infineon FL1-K series, 64 Mbit NOR flash, SPI Quad I/O interface, 108 MHz clock, 2.7-3.6 V supply, -40 to 85°C, 8-WSON (5x6) package

$518.8500Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL164K0XNFI013 specifications
ParameterValue
SeriesFL1-K
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size64Mbit
Memory formatFLASH
Case8-WFDFN Exposed Pad
Memory organization8M x 8
Write cycle time - word, page3ms

Product details

What this NOR flash does on the board

The S25FL164K0XNFI013 is a 64 Mbit NOR flash from Infineon's FL1-K series, built for code shadowing, configuration storage, and execute-in-place (XIP) in embedded systems.

Infineon lists the S25FL164K0XNFI013 as Obsolete. That means no new production runs from the factory. If you have this on a BOM for an active design, you need to plan a last-time buy or qualify a replacement before existing stock dries up. We can source this part through our independent supply network — quotes are against your specific quantity and date code needs.

Key parametrics for the design engineer

Memory organisation is 8 M x 8 bits — that is 64 Mbit in a byte-wide array. Page write cycle time is 3 ms typ, which matters for OTA firmware updates where you are writing many pages sequentially. Fine for factory automation, outdoor telecom cabinets, and instrumentation where the board stays above -40°C.

Frequently asked questions

What is the replacement for S25FL164K0XNFI013?

Infineon has not published an official successor for this exact order code. A functionally similar part would be another 64 Mbit SPI Quad I/O NOR flash in an 8-WSON package from the same FL1-K family, but pin compatibility must be verified against the target PCB footprint.

Does S25FL164K0XNFI013 require a specific voltage?

No separate core or I/O voltage needed.