Skip to main content
Infineon Technologies S25FL164K0XMFV011 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL164K0XMFV011 64 Mbit SPI NOR Flash, 108 MHz, Obsolete

MPNS25FL164K0XMFV011
Obsolete

Cypress FL1-K series, S25FL164K0XMFV011, 64 Mbit SPI Quad I/O NOR Flash, 108 MHz clock, 2.7V-3.6V supply, 8M x 8 organization, -40°C to 105°C, 8-SOIC.

$1.6303Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL164K0XMFV011 specifications
ParameterValue
SeriesFL1-K
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 105°C (TA)
PackageTube
TechnologyFLASH - NOR
Memory size64Mbit
Memory formatFLASH
Case8-SOIC (0.209\", 5.30mm Width)
Memory organization8M x 8
Write cycle time - word, page3ms

Product details

64 Mbit SPI Quad I/O NOR Flash — now in the surplus channel

The Cypress S25FL164K0XMFV011 is a 64 Mbit SPI Quad I/O NOR Flash memory from the FL1-K series, organized as 8M x 8. It clocks up to 108 MHz over the SPI bus with Quad I/O support, giving a read throughput that keeps an MCU fed for execute-in-place firmware without waiting on the memory.

No further factory orders or last-time-buy windows are open. For a new design or a long-running production line, qualifying a current-production pin-compatible NOR Flash is the prudent move before the remaining surplus dries up.

The 108 MHz clock rate with Quad I/O means the part can deliver sustained read throughput well above what a standard single-bit SPI at lower frequencies manages. For a firmware image that shadows into RAM at boot, or an OTA staging area that needs to fill a buffer quickly, this part keeps the CPU from stalling on flash reads. The 3 ms page write cycle is typical for this NOR generation — adequate for configuration storage and parameter updates, not a high-speed logging target.

Package and temperature grade — board-fit check

The part comes in an 8-SOIC wide-body package (0.209" body width, 5.30 mm) — surface-mount, 8-pin.

Frequently asked questions

What is the direct replacement for S25FL164K0XMFV011?

For a current-production alternative, look at the Cypress FL1-K or S25FL series 64 Mbit SPI NOR Flash parts in the same 8-SOIC package — verify pin compatibility and Quad I/O support against your layout.

Is S25FL164K0XMFV011 compatible with 3.3V logic?

Yes. The supply voltage range is 2.7V to 3.6V, so it operates directly on a 3.3V rail and its I/O levels are 3.3V-compatible without level shifters.