Skip to main content
Infineon Technologies S25FL132K0XMFA013 — Memory (DRAM / SRAM / Flash / EEPROM)

Infineon S25FL132K0XMFA013 32 Mbit NOR Flash, AEC-Q100

MPNS25FL132K0XMFA013
Obsolete

Infineon Technologies FL1-K series automotive SPI NOR flash, S25FL132K0XMFA013, 32 Mbit, 108 MHz quad I/O, 2.7–3.6 V, AEC-Q100, -40°C to 85°C, 8-SOIC 5.30 mm, tape and reel.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL132K0XMFA013 specifications
ParameterValue
SeriesFL1-K
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
GradeAutomotive
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size32Mbit
Memory formatFLASH
QualificationAEC-Q100
Case8-SOIC (0.209\", 5.30mm Width)
Memory organization4M x 8
Write cycle time - word, page3ms

Product details

The S25FL132K0XMFA013 is listed as Obsolete by Infineon. Availability is lot-specific and confirmed at RFQ — no stock-holding claim is made here.

32 Mbit NOR flash with 108 MHz quad I/O

This is a 32 Mbit (4M x 8) SPI NOR flash from the FL1-K series, organized as 4M x 8 bits. The memory interface supports SPI Quad I/O at a clock frequency of 108 MHz, giving a read throughput that suits code shadowing and firmware storage in an automotive ECU. The 108 MHz quad-I/O rate means the part can sustain a sequential read fast enough to feed a Cortex-M or similar MCU's cache without wait states on a 4-bit bus — a practical fit for boot memory or data logging where the NOR's fast random access matters.

8-SOIC package and board fit

The surface-mount package reflows on a standard SOIC land pattern and is hand-solderable for prototyping. Write cycle time is 3 ms typical per word or page — budget this into the firmware update routine; a full 32 Mbit erase and reprogram cycle will take several seconds at the page level.

Frequently asked questions

What is the closest pin-compatible alternative to S25FL132K0XMFA013 in this memory family?

Confirm the exact pinout and timing before substituting.

What compliance documentation does Infineon provide for S25FL132K0XMFA013?

The part carries AEC-Q100 automotive qualification. Documentation such as the datasheet and PCN history is typically available from Infineon's support portal for the FL1-K series.