Skip to main content
Infineon Technologies S25FL132K0XBHA020 — Memory (DRAM / SRAM / Flash / EEPROM)

Cypress S25FL132K0XBHA020 32Mbit NOR Flash, Quad SPI 108 MHz, AEC-Q100

MPNS25FL132K0XBHA020
Obsolete

Cypress FL1-K series, 32Mbit NOR Flash, 4M x 8 organization, Quad SPI interface at 108 MHz, 2.7V-3.6V supply, -40°C to 85°C, AEC-Q100 automotive grade, 24-TBGA (8x6 mm) tray package.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL132K0XBHA020 specifications
ParameterValue
SeriesAutomotive, AEC-Q100, FL1-K
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C~85°C(TA)
PackageTray
TechnologyFLASH - NOR
Memory size32Mbit
Memory formatFLASH
Case24-TBGA
Memory organization4M x 8
Write cycle time - word, page3ms

Product details

The Cypress S25FL132K0XBHA020 is a 32 Mbit NOR Flash memory from the FL1-K series, organized as 4M x 8 bits. It communicates over a Quad SPI interface running at 108 MHz, which gives the host controller fast read and program throughput without needing a parallel bus.

Supply voltage and interface — BOM-fit checks

The Quad SPI interface uses four I/O lines for data, plus chip select and clock.

Package and footprint — 24-TBGA (8x6 mm)

Housed in a 24-ball Thin BGA, body size 8 mm x 6 mm. This is a fine-pitch BGA requiring solder-paste stencil alignment and X-ray inspection after reflow. The footprint is specific; any pin-compatible replacement must share the same ball-out and package dimensions to avoid a PCB layout change.

Write cycle time and endurance context

Page and word write cycle time is 3 ms.

Frequently asked questions

What is the replacement for S25FL132K0XBHA020?

Cypress (Infineon) has not published a direct successor for this specific order code. A functionally equivalent part would need to be a 32 Mbit NOR Flash with Quad SPI, 2.7V-3.6V supply, 24-TBGA package, and AEC-Q100 qualification. Check the FL1-K series or S25FL132 base number for active variants; pin-compatibility must be verified against the 24-BGA ball map.

What is the operating voltage of S25FL132K0XBHA020?

The supply voltage range is 2.7 V to 3.6 V, making it compatible with 3.3 V logic systems.

Does S25FL132K0XBHA020 support Quad SPI?

Yes, the memory interface is SPI - Quad I/O, supporting quad-mode data transfer at up to 108 MHz clock frequency.