Skip to main content
Infineon Technologies S25FL129P0XMFV001 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL129P0XMFV001 Infineon 128Mbit NOR Flash SPI – Obsolete

MPNS25FL129P0XMFV001
Obsolete

Infineon FL-P series, S25FL129P0XMFV001, 128Mbit NOR Flash, SPI Quad I/O, 104 MHz, 2.7V–3.6V, -40°C to 105°C, 16-SOIC

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL129P0XMFV001 specifications
ParameterValue
SeriesFL-P
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency104 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C~105°C(TA)
PackageTube
TechnologyFLASH - NOR
Memory size128Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization16M x 8
Write cycle time - word, page5µs, 3ms

Product details

128Mbit NOR Flash with 104 MHz SPI Quad I/O

The S25FL129P0XMFV001 is a 128Mbit NOR Flash memory from Infineon's FL-P series, organised as 16M x 8 bits and accessed via an SPI Quad I/O interface running at 104 MHz clock frequency. The page write time is 3 ms typical, and the word write cycle takes 5 µs. Housed in a 16-SOIC package (0.295-inch body width, 7.50 mm), it is a surface-mount non-volatile memory suited for code shadowing, data logging, and firmware storage in embedded systems that require a reliable SPI NOR interface.

Infineon lists the S25FL129P0XMFV001 as obsolete. For existing BOM lines, we can source available inventory from our supply network. Given the obsolete status, verifying date-code authenticity and manufacturer markings is advised.

The 2.7V to 3.6V supply rail aligns with common 3.3V logic systems, but the lower threshold allows operation in battery-backed or lightly regulated 3V rails without an extra LDO.

Frequently asked questions

Is S25FL129P0XMFV001 obsolete?

Yes, Infineon has classified the S25FL129P0XMFV001 as obsolete. No official successor has been announced, so any replacement will require a design review.