Skip to main content
Infineon Technologies S25FL129P0XMFI003 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL129P0XMFI003 Infineon 128 Mbit NOR Flash – Obsolete

MPNS25FL129P0XMFI003
Obsolete

Infineon FL-P series, 128 Mbit NOR Flash, SPI Quad I/O interface, 104 MHz clock, 16-SOIC (7.50 mm width), 2.7 V to 3.6 V supply, -40°C to 85°C operating temperature.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL129P0XMFI003 specifications
ParameterValue
SeriesFL-P
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency104 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size128Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization16M x 8
Write cycle time - word, page5µs, 3ms

Product details

128 Mbit NOR Flash – SPI Quad I/O, 104 MHz

The S25FL129P0XMFI003 is a 128 Mbit NOR Flash memory from Infineon's FL-P series, organized as 16 M x 8 bits. The 16-SOIC package (0.295-inch body width, 7.50 mm) is a common footprint for code-storage Flash in embedded systems. Page program time is 3 ms typical; word program time is 5 µs typical.

Obsolete – Plan for Last-Time Buy or Replacement

Infineon lists the S25FL129P0XMFI003 as Obsolete. No official successor part number is provided in the available records. For existing BOM lines, a last-time buy or a pin-compatible alternative from the same FL-P family should be evaluated immediately. The base product number S25FL129 covers multiple speed and temperature variants in the 16-SOIC package. Cross-referencing the full order code against current Infineon Flash selector guides is recommended to identify a drop-in replacement with equivalent density, interface, and timing.

Because the part is obsolete, standard distributor stock is depleted. Sourcing through independent channels is the primary route. The 16-SOIC package is moisture-sensitive; verify the MSL level before opening the reel.

Frequently asked questions

What is a direct replacement for the S25FL129P0XMFI003?

No official replacement is listed in the available records. The base product number S25FL129 covers multiple variants in the 16-SOIC package; cross-reference the full order code against Infineon's current Flash selector guide to find a drop-in with matching density (128 Mbit), SPI Quad I/O interface, and 104 MHz clock.

Does the S25FL129P0XMFI003 support Quad SPI?

Yes, the memory interface is SPI with Quad I/O support, allowing four-bit data transfers at up to 104 MHz for higher read throughput.