Skip to main content
Log in
Infineon Technologies S25FL129P0XBHV300 — Memory (DRAM / SRAM / Flash / EEPROM)

Cypress S25FL129P0XBHV300 128Mbit NOR Flash, 104 MHz SPI Quad I/O

MPNS25FL129P0XBHV300
Obsolete

Cypress FL-P series, 128Mbit NOR Flash, SPI Quad I/O, 104 MHz, 2.7V–3.6V, -40°C to 105°C, 24-TBGA (6x8 mm), Tray.

Infineon Technologies S25FL129P0XBHV300 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL129P0XBHV300 specifications
ParameterValue
SeriesFL-P
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency104 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 105°C (TA)
PackageTray
TechnologyFLASH - NOR
Memory size128Mbit
Memory formatFLASH
Case24-TBGA
Memory organization16M x 8
Write cycle time - word, page5µs, 3ms

Product details

128 Mbit NOR Flash — SPI Quad I/O at 104 MHz

Supply range is 2.7 V to 3.6 V, and the part is rated for -40°C to 105°C, so it fits outdoor telecom, automotive cabin, or factory-floor enclosures without a temperature grade compromise.

Obsolete — sourcing via independent channel

This part is officially obsolete. Cypress has marked it end-of-life, so there is no factory pipeline or last-time-buy window left.

24-ball BGA — reflow and inspection required

That means controlled reflow profile, X-ray inspection after soldering, and no hand-rework without a hot-air station and stencil. Not a part for prototype breadboards or quick-turn repair — it belongs on a production board with a proper assembly process.

Write cycle timing and endurance context

Page program time is 3 ms typical, word program 5 µs. That is competitive for NOR Flash of this density — fine for firmware updates that happen infrequently, not for wear-leveled data logging where you'd want a NAND or FRAM.

Frequently asked questions

Is S25FL129P0XBHV300 obsolete?

Yes, the S25FL129P0XBHV300 is officially obsolete. Cypress has discontinued production, so new orders are fulfilled through surplus and independent distribution channels.

What is the replacement for S25FL129P0XBHV300?

No official successor is listed in the available records. For a pin-compatible drop-in, check the S25FL129P series with the same 24-TBGA footprint and SPI Quad I/O interface — but confirm density and timing with the datasheet before committing the BOM.

What is the supply voltage of S25FL129P0XBHV300?

The supply voltage range is 2.7 V to 3.6 V, making it compatible with standard 3.3 V logic rails.

What is the pinout of S25FL129P0XBHV300?

The pinout follows the standard 24-ball BGA (6x8 mm) footprint for Cypress FL-P series NOR Flash with SPI Quad I/O. Refer to the Cypress datasheet for the ball-map diagram.