Skip to main content
Log in
Infineon Technologies S25FL128SAGMFVR00 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL128SAGMFVR00 128Mbit NOR Flash, 133 MHz Quad SPI

MPNS25FL128SAGMFVR00
Active

Infineon (Cypress) FL-S series S25FL128SAGMFVR00, 128Mbit SPI NOR Flash, 133 MHz clock frequency, Quad I/O interface, 2.7V-3.6V supply, -40°C to 105°C, 16-SOIC package.

$3.4882Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL128SAGMFVR00 specifications
ParameterValue
SeriesFL-S
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency133 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 105°C (TA)
PackageTray
TechnologyFLASH - NOR
Memory size128Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization16M x 8

Product details

133 MHz Quad SPI NOR Flash for code-shadow and XIP

The Infineon S25FL128SAGMFVR00 is a 128Mbit SPI NOR Flash from the FL-S family, built for code storage and execute-in-place (XIP) in embedded systems. Its 133 MHz clock rate with Quad I/O support delivers sustained read throughput that keeps a Cortex-M or RISC-V core fed without wait-state stalls on the SPI bus.

At 133 MHz in Quad I/O mode, the part can deliver around 66 MB/s read throughput (133 MHz x 4 bits/cycle). That is enough to support XIP from Flash for many real-time control loops without needing a separate DRAM. The host SPI controller must support a 133 MHz SCLK — check the MCU's SPI prescaler limits before committing the layout.

This is a current-production part, so new designs can proceed without near-term last-time-buy risk. The FL-S family has broad distribution support, and the 16-SOIC package is a high-volume standard that tends to stay in production longer than niche packages.

Frequently asked questions

Is S25FL128SAGMFVR00 a direct replacement for S25FL128SAGMFI000?

The S25FL128SAGMFVR00 and S25FL128SAGMFI000 share the same 128Mbit FL-S family and 16-SOIC package. The suffix difference typically indicates a packaging or temperature grade variant — verify the specific marking and operating range against your BOM before substituting.

Does S25FL128SAGMFVR00 support Quad SPI?

Yes, the memory interface is SPI with Quad I/O, supporting standard, dual, and quad read commands. This allows four-bit-wide data transfers at the 133 MHz clock for higher throughput.