Skip to main content
Log in
S25FL128P0XNFI011

S25FL128P0XNFI011 128 Mbit SPI NOR Flash, 104 MHz, Obsolete

MPNS25FL128P0XNFI011
Obsolete

Infineon FL-P series S25FL128P0XNFI011, 128 Mbit SPI NOR Flash, 104 MHz clock, 2.7V~3.6V supply, -40°C~85°C, 8-WDFN Exposed Pad, Tube.

$4.6400Ref. price · indicative, final on quote
Infineon Technologies S25FL128P0XNFI011 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL128P0XNFI011 specifications
ParameterValue
SeriesFL-P
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency104 MHz
Memory interfaceSPI
Operating temperature-40°C~85°C(TA)
PackageTube
TechnologyFLASH - NOR
Memory size128Mbit
Memory formatFLASH
Case8-WDFN Exposed Pad
Memory organization16M x 8
Write cycle time - word, page3ms

Product details

The non-volatile NOR architecture supports byte- and page-level reads with a 3 ms write cycle time per page, making it a fit for firmware storage, configuration data, and OTA staging in industrial controllers, networking gear, and IoT edge nodes.

That means no last-time-buy windows remain, and new designs should not target this order code.

Rework note — 8-WSON with exposed pad

Rework is doable with hot air if you preheat the board to 100-120°C to reduce thermal shock. The pad is large relative to the package, so it wicks heat away from the leads — you need a nozzle that covers the whole body and a profile that hits 240°C pad temperature for at least 30 seconds. After removal, clean the pad site with braid and a tacky flux; the exposed pad needs fresh solder paste or a preform to ensure void-free attachment.

Frequently asked questions

What is the closest pin-compatible alternative to S25FL128P0XNFI011?

The record does not list an official successor or cross-reference. Pin-compatible alternatives would be other 8-WSON SPI NOR Flash parts from Infineon's FL-P series or from vendors like Winbond or Macronix that offer the same package and interface. Verify the footprint and supply voltage before substituting.