Skip to main content
Infineon Technologies S25FL116K0XNFV013 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL116K0XNFV013 Infineon 16 Mbit SPI NOR Flash, Obsolete

MPNS25FL116K0XNFV013
Obsolete

Infineon FL1-K series, SPI NOR Flash, 16 Mbit, 108 MHz, Quad I/O, 8-WDFN Exposed Pad, Tape & Reel, -40°C to 105°C.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL116K0XNFV013 specifications
ParameterValue
SeriesFL1-K
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 105°C (TA)
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size16Mbit
Memory formatFLASH
Case8-WDFN Exposed Pad
Memory organization2M x 8
Write cycle time - word, page3ms

Product details

Obsolete — sourcing through independent surplus

Infineon lists the S25FL116K0XNFV013 as Obsolete.

16 Mbit SPI NOR with Quad I/O at 108 MHz

The S25FL116K0XNFV013 is a 16 Mbit (2M x 8) SPI NOR flash from Infineon's FL1-K series, supporting Quad I/O at a 108 MHz clock. The Quad I/O interface effectively quadruples the read throughput over standard SPI — useful for execute-in-place (XIP) boot or code shadowing where the bus is the bottleneck. Memory organization is byte-addressable (2M x 8), with a 3 ms typical page write cycle. The 108 MHz clock rate means the serial bus can sustain roughly 54 MB/s in quad-read mode before protocol overhead — enough to feed a Cortex-M or low-end application processor without wait states.

Housed in an 8-WDFN with exposed pad (5x6 mm WSON), the part is surface-mount and supplied on Tape & Reel.

Frequently asked questions

What package does S25FL116K0XNFV013 use?

8-WDFN with exposed pad, also designated as 8-WSON (5x6 mm). The exposed pad must be connected to ground per the recommended footprint for thermal and electrical performance.