Skip to main content
Log in
S25FL116K0XMFN041

S25FL116K0XMFN041 16Mbit NOR Flash, 108 MHz Quad SPI, 8-SOIC

MPNS25FL116K0XMFN041
Obsolete

Infineon FL1-K series S25FL116K0XMFN041, 16Mbit SPI NOR Flash, 108 MHz clock, Quad I/O interface, 2.7V-3.6V supply, -40°C to 125°C, 8-SOIC package, Tube.

Infineon Technologies S25FL116K0XMFN041 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL116K0XMFN041 specifications
ParameterValue
SeriesFL1-K
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C~125°C(TA)
PackageTube
TechnologyFLASH - NOR
Memory size16Mbit
Memory formatFLASH
Case8-SOIC (0.154\", 3.90mm Width)
Memory organization2M x 8
Write cycle time - word, page3ms

Product details

16 Mbit NOR Flash with Quad-SPI — what you get

The Infineon S25FL116K0XMFN041 is a 16 Mbit SPI NOR Flash memory from the FL1-K series, organised as 2M x 8 bits. It communicates over a standard SPI bus with Quad I/O support, clocking up to 108 MHz for fast read and program operations.

This part carries an official Obsolete lifecycle status. The 16 Mbit Quad-SPI NOR Flash space has several active alternatives from Infineon and other vendors, but pin-compatibility varies by package and interface variant — a direct drop-in replacement is not something to assume without comparing the footprint and the register map.

Quad I/O — check your host controller

The S25FL116K0XMFN041 uses a standard SPI bus with Quad I/O (four data lines) for read and program operations at 108 MHz. If your MCU or SoC only supports single or dual SPI, the part still works — it falls back to the standard SPI protocol — but you lose the throughput advantage. The 8-SOIC package (0.154-inch width, 3.90 mm body) is a common footprint shared with many serial NOR Flash parts in the 8-pin SOIC format, so a board layout designed for a different 8-SOIC SPI Flash will likely accept this part without a respin.

Frequently asked questions

What is the replacement for S25FL116K0XMFN041?

Infineon's FL1-K series includes other density and package variants, but a direct pin-compatible replacement is not confirmed in the available records. For an existing BOM line, the best path is to source the exact S25FL116K0XMFN041 through independent distribution against an RFQ. For new designs, evaluate current Infineon NOR Flash families such as the FL-S or FS-S series, but verify the footprint and interface compatibility before substituting.

Is S25FL116K0XMFN041 compatible with SPI Quad I/O?

Yes. The S25FL116K0XMFN041 supports SPI Quad I/O as its primary memory interface, operating at a clock frequency of 108 MHz. It also works in standard single or dual SPI modes for backward compatibility with controllers that lack Quad I/O support.

Is S25FL116K0XMFN041 obsolete?

Yes, the lifecycle status is listed as Obsolete. Infineon has discontinued production, and no last-time-buy or successor part is recorded. Sourcing is limited to the independent surplus and broker channel.

Is S25FL116K0XMFN041 compatible with S25FL116K0XMFN043?

The S25FL116K0XMFN041 and S25FL116K0XMFN043 share the same base product number and memory density, but the suffix difference often indicates a variation in package, temperature range, or shipping medium. Without a cross-reference table in the available records, you should compare the datasheets pin-for-pin and confirm the operating temperature range and supply voltage match your design before assuming compatibility.