Skip to main content
Infineon Technologies S25FL064LABNFV043 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL064LABNFV043 64Mbit SPI NOR Flash, 108 MHz, Active

MPNS25FL064LABNFV043
Active

Cypress FL-L Series, S25FL064LABNFV043, 64Mbit SPI NOR Flash, 108 MHz, SPI - Quad I/O, QPI, 2.7V~3.6V, -40°C~105°C, 8-UDFN Exposed Pad, Surface Mount.

$1.8731Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL064LABNFV043 specifications
ParameterValue
SeriesFL-L
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O, QPI
Operating temperature-40°C ~ 105°C (TA)
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size64Mbit
Memory formatFLASH
Case8-UDFN Exposed Pad
Memory organization8M x 8

Product details

The Cypress S25FL064LABNFV043 is a 64 Mbit SPI NOR Flash memory from the FL-L series, organized as 8M x 8 bits. It uses a standard SPI interface with Quad I/O and QPI support, allowing read throughput up to 108 MHz clock frequency. Typical applications include firmware storage, boot code, parameter logging, and over-the-air update staging in embedded systems such as industrial controllers, networking gear, IoT edge nodes, and automotive infotainment or telematics units.

The 108 MHz clock rate on the SPI bus, combined with Quad I/O, delivers a sustained read bandwidth that can keep a Cortex-M or similar core fed without wait states during XIP (eXecute In Place) operation. At this speed, the flash can saturate a 50 MHz Quad-SPI controller with margin. The QPI mode reduces command overhead by using all four I/O lines for both address and data, cutting latency on random reads. For designs that boot from external flash, this clock speed directly impacts startup time and real-time response.

The 8-UDFN package with exposed pad (supplier package 8-USON 4x4 mm) keeps the board footprint small — about the size of an SOIC-8 but thinner — and the pad helps pull heat out during sustained read bursts. Surface-mount assembly is straightforward with standard reflow profiles.

Frequently asked questions

What is the maximum clock speed for S25FL064LABNFV043?

The maximum clock frequency is 108 MHz when using the SPI interface with Quad I/O or QPI protocol. This enables fast read throughput for code shadowing or XIP applications.

Is S25FL064LABNFV043 compatible with 3.3V systems?

This makes it a drop-in fit for most 3.3 V microcontrollers and SoCs.