Skip to main content
Log in
Infineon Technologies S25FL064LABNFM013 — Memory (DRAM / SRAM / Flash / EEPROM)

Infineon S25FL064LABNFM013 64Mbit NOR Flash, 108 MHz, AEC-Q100

MPNS25FL064LABNFM013
Active

Infineon FL-L series, Automotive AEC-Q100, 64Mbit NOR Flash, 108 MHz, SPI - Quad I/O, QPI, 2.7V~3.6V, -40°C~125°C, 8-WFDFN Exposed Pad, Tape & Reel.

$3.4300Ref. price · indicative, final on quote
Infineon Technologies S25FL064LABNFM013 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL064LABNFM013 specifications
ParameterValue
SeriesAutomotive, AEC-Q100, FL-L
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency108 MHz
Memory interfaceSPI - Quad I/O, QPI
Operating temperature-40°C~125°C(TA)
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size64Mbit
Memory formatFLASH
Case8-WFDFN Exposed Pad
Memory organization8M x 8

Product details

Automotive NOR Flash for code shadowing and data logging

It stores firmware and calibration data in engine control units, transmission controllers, and ADAS modules where the -40 to 125 °C temperature range covers under-hood thermal cycling. The 108 MHz Quad SPI interface (Quad I/O and QPI modes) lets the host MCU read code at high throughput for shadowing to RAM or fast boot sequences.

The 108 MHz clock rate on the Quad SPI interface supports Quad I/O mode for high read throughput.

EOL — sourcing reality for your BOM

The part is end-of-life (EOL hot). Infineon has issued a last-time-buy window; after that, supply moves to surplus and broker channels.

Frequently asked questions

Is S25FL064LABNFM013 obsolete or end-of-life?

Yes, S25FL064LABNFM013 is end-of-life (EOL hot). Infineon has announced discontinuation; last-time-buy dates apply. We source it to order against an RFQ through independent distribution.

What is the recommended replacement for S25FL064LABNFM013?

Infineon's official replacement within the FL-L family is the S25FL064LABNFM010 (same 64 Mbit density, same 8-WSON package, same Quad SPI interface). Verify the exact order code with your Infineon FAE for final BOM validation.

What are the temperature range and automotive qualification of S25FL064LABNFM013?

The S25FL064LABNFM013 is AEC-Q100 qualified and rated for -40 to 125 °C operating temperature, suitable for automotive under-hood and industrial environments.

Does S25FL064LABNFM013 support Quad SPI (QPI) mode?

Yes, the S25FL064LABNFM013 supports both Quad I/O SPI and QPI (Quad Peripheral Interface) modes, enabling higher read throughput than standard SPI.

What is the exact package and pinout of S25FL064LABNFM013?

The S25FL064LABNFM013 is in an 8-WFDFN exposed pad package (8-WSON, 5x6 mm). The pinout is standard FL-L: CS#, SO/SIO1, WP#/SIO2, GND, SI/SIO0, SCK, HOLD#/SIO3, VCC.