Skip to main content
Log in
Infineon Technologies IRF1404ZSTRL — Discrete Semiconductors

IRF1404ZSTRL N-Channel MOSFET, 40V, 180A, HEXFET, D2PAK

MPNIRF1404ZSTRL
Obsolete

Infineon HEXFET® IRF1404ZSTRL, N-Channel MOSFET, 40V Vdss, 180A Id, 3.7mOhm Rds(on) at 10V, 150nC Qg, D2PAK package, -55°C to 175°C.

$2.1200Ref. price · indicative, final on quote
Infineon Technologies IRF1404ZSTRL datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IRF1404ZSTRL specifications
ParameterValue
SeriesHEXFET®
FET typeN-Channel
MountingSurface Mount
Drain to source voltage40 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C180A (Tc)
Power dissipation220W (Tc)
Operating temperature-55°C ~ 175°C (TJ)
PackageTape & Reel (TR)
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Vgs(th) (Max) @ id4V @ 250µA
Rds on (Max) @ id, vgs3.7mOhm @ 75A, 10V
Gate charge (Qg) (Max) @ vgs150 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds4340 pF @ 25 V

Product details

40 V Vdss — the voltage ceiling that limits 48 V use

The 40 V drain-to-source rating is the hard voltage limit. A 48 V nominal bus (like telecom or industrial 48 V systems) exceeds this rating even at steady state, let alone during transients. This part is sized for 12 V, 24 V, or 36 V rails where the maximum peak stays under 40 V. For 48 V applications, look for a 60 V or 75 V rated MOSFET in the same D2PAK footprint.

Obsolete — sourcing from surplus and broker channels

Sourcing now runs through independent distribution and surplus stock.

3.7 mOhm Rds(on) — what it means for thermal design

Package and temperature range — D2PAK for surface-mount power

The D2PAK (TO-263-3) surface-mount package with exposed tab allows the PCB copper to act as a heatsink.

Frequently asked questions

What is the Rds(on) of IRF1404ZSTRL?

The maximum on-resistance is 3.7 mOhm at 75 A drain current and 10 V gate drive. This is the figure used for conduction loss calculations in high-current switching designs.

Can I use IRF1404ZSTRL in 48V systems?

No. The 40 V drain-to-source rating is below the 48 V nominal bus voltage. Use a 60 V or 75 V rated MOSFET for 48 V applications.

What is the replacement for IRF1404ZSTRL?

No official replacement is listed in the manufacturer's records. For a similar low-voltage, high-current N-channel MOSFET in D2PAK, consider parts with 40 V or higher Vdss and comparable Rds(on) from the same HEXFET family or competitors. The exact substitute depends on your gate drive voltage and switching frequency requirements.