Infineon CoolMOS™ P7 series, IPU95R1K2P7AKMA1, N-Channel MOSFET, 950 V Vdss, 6 A Id, 1.2 Ohm Rds(on) at 10 V, 15 nC Qg, TO-251-3 (PG-TO251-3) through-hole package, -55°C to 150°C junction temperature.
| Parameter | Value |
|---|---|
| Series | CoolMOS™ P7 |
| FET type | N-Channel |
| Mounting | Through Hole |
| Drain to source voltage | 950 V |
| Drive voltage (Max rds on, min rds on) | 10V |
| Current - continuous drain (Id) @ 25°C | 6A (Tc) |
| Power dissipation | 52W (Tc) |
| Operating temperature | -55°C ~ 150°C (TJ) |
| Package | Tube |
| Vgs | ±20V |
| Technology | MOSFET (Metal Oxide) |
| Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Vgs(th) (Max) @ id | 3.5V @ 140µA |
| Rds on (Max) @ id, vgs | 1.2Ohm @ 2.7A, 10V |
| Gate charge (Qg) (Max) @ vgs | 15 nC @ 10 V |
| Input capacitance (Ciss) (Max) @ vds | 478 pF @ 400 V |
The IPU95R1K2P7AKMA1: Total gate charge of 15 nC at 10 V.
This part mounts through-hole in a TO-251-3 (PG-TO251-3) package with short leads — it is designed for wave-solder or hand-solder assembly, not reflow.
ROHS3 compliance is confirmed, so no exemption expiry to track for European or California-market builds.
This is the figure to use for worst-case conduction loss calculations in the thermal design.
Yes, it is a through-hole device in a TO-251-3 (PG-TO251-3) package with short leads. It is intended for wave-solder or hand-solder assembly, not reflow.