The IPU80R750P7AKMA1: The 17 nC gate charge suits hard-switched topologies. The through-hole TO-251-3 package (PG-TO251-3) is a compact three-lead IPak. It is RoHS3 compliant and free of lead and halogenated flame retardants.
Rds(on), gate charge, and the switching trade-off
At 7 A full load, the resistive loss is about 37 W — well within the 51 W package limit at 25 °C case, but the junction temperature rise must be checked against the thermal impedance of the heatsink or PCB copper. The 17 nC total gate charge at 10 V is low enough that a simple gate-drive transformer or a driver IC with 1 A peak output can switch it at 100 kHz with acceptable cross-conduction margin. Input capacitance is 460 pF at 500 V drain-source, which keeps the Miller plateau narrow and the turn-off delay short. Gate threshold voltage is 3.5 V maximum at 140 µA drain current. The datasheet specifies 10 V drive for the rated Rds(on) minimum.
The part is RoHS3 compliant, with no exemptions for lead or phthalates. No PCN or EOL notice has been published for this order code as of the latest check.