Skip to main content
Log in
Infineon Technologies IPS1041LPBF — Power Management (PMIC / Gate Driver)

Infineon IPS1041LPBF Low-Side Switch, 80 mOhm, 1.95 A

MPNIPS1041LPBF
Obsolete

Infineon IPS1041LPBF low-side smart switch, 1 output, N-channel, 80 mOhm Rds(on) typ, 1.95 A max output, 28 V load, SOT-223, Tube.

Infineon Technologies IPS1041LPBF datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IPS1041LPBF specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load28V (Max)
Voltage - supply (Vcc (Vdd))Not Required
Output current1.95A
I/O channels1
InterfaceOn/Off
Operating temperature-40°C~150°C(TJ)
PackageTube
Rds on80mOhm
CaseTO-261-4, TO-261AA
Fault protectionCurrent Limiting (Fixed), Over Temperature
Output configurationLow Side
Ratio - Input:Output1:1

Product details

Low-side switch with integrated protection

The IPS1041LPBF is a single-channel low-side N-channel smart switch from Infineon's IPS family. It integrates a power MOSFET with current limiting and overtemperature protection, so it can drive resistive, inductive, or lamp loads without an external sense resistor or thermal fuse. Rated for a load voltage up to 28 V and a continuous output current of 1.95 A, with a typical on-resistance of 80 mOhm. The 1:1 input-to-output ratio and non-inverting input make it a straightforward on/off switch controlled by a logic-level signal — no external Vcc supply needed.

150°C junction — harsh-environment capable

Frequently asked questions

What is the replacement for IPS1041LPBF?

Infineon does not list a direct successor for the IPS1041LPBF in the available records. For a pin-compatible alternative, check the IPS series from Infineon or a similar low-side smart switch from STMicroelectronics or NXP — confirm the package (SOT-223), Rds(on), and protection features match your BOM. We can help cross-reference against an RFQ.

What are the specifications of IPS1041LPBF (voltage, current, Rds(on))?

The IPS1041LPBF is a low-side N-channel switch rated for a 28 V max load voltage, 1.95 A continuous output current, and a typical on-resistance of 80 mOhm.