Skip to main content
Log in
Infineon Technologies IPS032G — Power Management (PMIC / Gate Driver)

Infineon IPS032G Low-Side Switch, 45 mOhm, 1.65 A

MPNIPS032G
Obsolete

Infineon IPS032G, dual low-side N-channel power switch, 45 mOhm typ Rds(on), 1.65 A max output, 35 V max load, SOIC-16, -40 to 150°C.

Infineon Technologies IPS032G datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IPS032G specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load35V (Max)
Voltage - supply (Vcc (Vdd))Not Required
Output current1.65A
I/O channels2
InterfaceOn/Off
Operating temperature-40°C ~ 150°C (TJ)
PackageTube
Rds on45mOhm
Case16-SOIC (0.154\", 3.90mm Width)
Fault protectionCurrent Limiting (Fixed), Over Temperature
Output configurationLow Side
Ratio - Input:Output1:1

Product details

Dual low-side switch for inductive and resistive loads

The Infineon IPS032G is a dual-channel low-side N-channel power switch in a 16-SOIC package. It drives resistive and inductive loads up to 1.65 A per channel, with a typical on-resistance of 45 mOhm. The switch is controlled by a simple On/Off logic input (non-inverting) and requires no external Vcc supply — the gate drive is self-powered from the load voltage.

Built-in fault protection for rugged environments

Integrated current limiting (fixed threshold) and over-temperature shutdown protect the switch and the load from fault conditions. This reduces external protection circuitry and improves system reliability in automotive and industrial applications.

Available inventory is sourced through independent distribution. No stock-holding claim is made.

Frequently asked questions

What is the replacement for IPS032G?

Infineon has not published an official successor or pin-compatible replacement for the IPS032G. For a functional equivalent, review other dual low-side switches in the same 16-SOIC footprint, but verify pin compatibility and parametric fit against your design.