Skip to main content
Infineon Technologies IPI60R385CP
Infineon Technologies

Infineon IPI60R385CP CoolMOS N-Channel MOSFET, 600 V, 9 A

MPNIPI60R385CP
End of Life

Infineon CoolMOS™ IPI60R385CP, N-Channel MOSFET, 600 V Vdss, 9 A Id, 385 mOhm Rds(on) @ 10 V, 22 nC Qg, TO-262-3 (I²Pak) through-hole, -55°C to 150°C Tj.

$0.95Ref. price · indicative, final on quote
IPI60R385CP datasheet
PackagingTO-262-3 Long Leads, I²Pak, TO-262AA
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

IPI60R385CP Technical Specifications
ParameterValue
SeriesCoolMOS™
FET typeN-Channel
Mounting typeThrough Hole
Drain to source voltage600 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C9A (Tc)
Power dissipation83W (Tc)
Operating temperature-55°C ~ 150°C (TJ)
PackageBulk
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-262-3 Long Leads, I²Pak, TO-262AA
Vgs(th) (Max) @ id3.5V @ 340µA
Rds on (Max) @ id, vgs385mOhm @ 5.2A, 10V
Gate charge (Qg) (Max) @ vgs22 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds790 pF @ 100 V

Product details

The IPI60R385CP: It comes in a TO-262-3 (I²Pak) through-hole package — the long-lead variant of the D²Pak, preferred for designs where the PCB sees vibration or where a through-hole joint is specified over a surface-mount reflow. Rds(on) is 385 mOhm at 5.2 A, 10 V. The 83 W package rating sets the thermal limit. Gate charge is 22 nC at 10 V. This is moderate for a 600 V, 9 A part.

Parametric profile — switching loss and drive budget

Input capacitance Ciss is 790 pF at 100 V Vds. Threshold voltage is 3.5 V max at 340 µA. The 10 V drive voltage reaches the rated minimum Rds(on). Maximum gate-source voltage is ±20 V, giving a comfortable margin for gate-drive overshoot in a hard-switched bridge leg — a common failure point in 600 V designs.

Lifecycle and compliance — active production, no LTB worry

RoHS compliance is confirmed as ROHS3 — the part is lead-free and meets the latest EU exemption rules. No separate lead-free certification document is needed for a standard commercial BOM.

Package and mounting — the I²Pak through-hole footprint

The TO-262-3 (I²Pak) package is the through-hole sibling of the D²Pak (TO-263). It has three leads and a metal tab that is electrically connected to the drain. The long leads suit wave-solder assembly and provide a mechanical anchor in high-vibration environments like motor drives or industrial PFC stages. The supplier device package code is PG-TO262-3-1 — Infineon's internal drawing number for this lead form. The tab is the primary thermal path; a heatsink clip or a bolted tab to the chassis is expected for continuous operation above a few amps.

Frequently asked questions

What is the maximum operating temperature for IPI60R385CP?

The junction temperature range is -55°C to 150°C. This covers industrial and military-temperature environments — motor drives, outdoor PFC stages, and downhole equipment where the ambient can reach 85°C or higher.

Does IPI60R385CP have RoHS compliance?

Yes, it is ROHS3 compliant — lead-free and meets the current EU exemption framework. No additional lead-free certification is required for standard commercial BOMs.

Can IPI60R385CP be used in high-frequency switching applications?

With 22 nC gate charge and 790 pF input capacitance, it is suited for hard-switching topologies up to about 100–200 kHz. Above that, switching losses will dominate the thermal budget unless the design uses soft-switching or a lower-Qg FET.