Skip to main content
Log in
Infineon Technologies IPD60R600P6ATMA1

Infineon IPD60R600P6ATMA1 CoolMOS™ P6 N-Ch 600 V 7.3 A

MPNIPD60R600P6ATMA1
End of Life

Infineon CoolMOS™ P6 series, IPD60R600P6ATMA1, N-Channel 600 V 7.3 A MOSFET, 600 mOhm Rds(on) at 10 V, 12 nC gate charge, DPAK (TO-252-3) package, -55 to 150 °C junction temperature.

$1.45Ref. price · indicative, final on quote
Infineon Technologies IPD60R600P6ATMA1 datasheet (PDF)
PackagingTO-252-3, DPAK (2 Leads + Tab), SC-63
RoHSROHS3 Compliant
SeriesCoolMOS™ P6
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IPD60R600P6ATMA1 specifications
ParameterValue
SeriesCoolMOS™ P6
FET typeN-Channel
MountingSurface Mount
Drain to source voltage600 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C7.3A (Tc)
Power dissipation63W (Tc)
Operating temperature-55°C ~ 150°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-252-3, DPAK (2 Leads + Tab), SC-63
Vgs(th) (Max) @ id4.5V @ 200µA
Rds on (Max) @ id, vgs600mOhm @ 2.4A, 10V
Gate charge (Qg) (Max) @ vgs12 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds557 pF @ 100 V

Product details

That translates to lower crossover losses in hard-switched converters.

Temperature range and reliability

The ROHS3 compliance simplifies compliance for EU and RoHS-regulated markets.

No direct second-source is listed in the Infineon cross-reference, but the CoolMOS™ P6 family shares pin-compatible footprints across density options; if your BOM needs a functional alternate, the IPD50R950CEAUMA1 offers a 500 V 950 mOhm variant in the same DPAK, though the lower voltage and higher Rds(on) shift the operating point.

Frequently asked questions

Is IPD60R600P6ATMA1 suitable for high-frequency switching?

With a 12 nC gate charge and 557 pF input capacitance, the IPD60R600P6ATMA1 is well-suited for switching frequencies up to approximately 100 kHz in hard-switched topologies. Layout attention to the gate loop is needed to manage ringing.