The IPAN70R600P7SXKSA1: It comes in a TO-220-3 Full Pack (PG-TO220-FP) through-hole package, which means the back of the tab is electrically isolated — no insulating pad or washer needed when bolting it to a heatsink. The CoolMOS P7 series is a high-voltage MOSFET platform for hard-switching topologies like flyback, PFC, and LLC converters. Gate charge is 10.5 nC at 10 V.
Rds(on) is 600 mOhm at 10 V gate drive; gate charge is 10.5 nC at 10 V. Input capacitance is 364 pF at 400 V Vds; junction temperature rating is 150°C.
Through-hole Full-Pack — serviceable and isolated
The TO-220 Full Pack (PG-TO220-FP) is a through-hole package with a fully molded back — the metal tab is buried in epoxy, so the mounting hole is electrically isolated from the drain. That matters when you are swapping a MOSFET on a live customer site or in a repair depot: no thermal pad to align, no shoulder washer to lose, and the screw torque is less critical because there is no fragile ceramic pad to crack. The package is pin-compatible with standard TO-220 footprints, but the Full Pack body is slightly thicker, so check the heatsink clip clearance if you are retrofitting a board originally designed for a non-isolated TO-220.
No end-of-life notices or last-time-buy windows are associated with this order code.