Skip to main content
Log in
Infineon Technologies IPA60R800CEXKSA1 — Discrete Semiconductors

Infineon IPA60R800CEXKSA1 CoolMOS™ CE N-Channel MOSFET

MPNIPA60R800CEXKSA1
Obsolete

Infineon CoolMOS™ CE series, N-Channel MOSFET, 600 V drain-source, 5.6 A continuous drain at 25°C, 800 mOhm Rds(on) at 10 V gate drive, TO-220-3 Full Pack (PG-TO220-FP), through-hole mount, -40°C to 150°C junction temperature.

Infineon Technologies IPA60R800CEXKSA1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IPA60R800CEXKSA1 specifications
ParameterValue
SeriesCoolMOS™ CE
FET typeN-Channel
MountingThrough Hole
Drain to source voltage600 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C5.6A (Tc)
Power dissipation27W (Tc)
Operating temperature-40°C ~ 150°C (TJ)
PackageTube
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-220-3 Full Pack
Vgs(th) (Max) @ id3.5V @ 170µA
Rds on (Max) @ id, vgs800mOhm @ 2A, 10V
Gate charge (Qg) (Max) @ vgs17.2 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds373 pF @ 100 V

Product details

600 V, 5.6 A, 800 mOhm — the CoolMOS™ CE workhorse in a fully isolated package

The IPA60R800CEXKSA1 comes in a TO-220 Full Pack (PG-TO220-FP) package, which provides full isolation from the heatsink — no isolation washer needed, simplifying assembly and improving thermal transfer to the case. Typical applications include power factor correction (PFC) circuits, flyback converters, and other offline switch-mode power supplies where 600 V blocking and moderate current handling are required.

Gate charge is 17.2 nC at 10 V; input capacitance is 373 pF at 100 V.

Frequently asked questions

What is the replacement for IPA60R800CEXKSA1?

Infineon has not published a direct drop-in replacement order code for the IPA60R800CEXKSA1. The closest functional match would be a current CoolMOS™ or CoolMOS™ C7 N-channel MOSFET with a 600 V drain-source rating, 5.6 A continuous drain current, 800 mOhm maximum on-resistance, and a TO-220 Full Pack package. Check the Infineon product selector or cross-reference tool for the latest active part numbers in the same voltage and Rds(on) class.

Can I use IPA60R800CEXKSA1 in a PFC circuit?

Yes, the 600 V drain-source rating and 5.6 A continuous drain current make it suitable for power factor correction stages in offline supplies up to a few hundred watts. The 800 mOhm on-resistance is on the higher side for modern PFC designs, so check the conduction loss against your efficiency target. The low gate charge (17.2 nC) keeps the drive losses low at typical PFC switching frequencies.