600 V, 30 A TrenchStop® IGBT in a surface-mount DPak
The Infineon IKD15N60RFATMA1 is a 600 V, 30 A Trench Field Stop IGBT from the TrenchStop® series, housed in a surface-mount PG-TO252-3 (DPak) package. It is designed for hard-switching applications such as motor drives, PFC stages, and general-purpose inverters where board space is tight and a through-hole TO-220 or TO-247 won't fit. The 175 °C maximum junction temperature gives it headroom for thermal cycling in industrial environments.
Conduction and switching — what the numbers mean for the power stage
Vce(on) is specified at 2.5 V typical with 15 V gate drive at 15 A collector current. Switching energy is 270 µJ turn-on and 250 µJ turn-off, tested at 400 V, 15 A, with a 15 Ω gate resistor and 15 V gate drive. These numbers let you calculate switching losses at your operating frequency. The 90 nC gate charge is moderate — a standard IGBT driver like the 1EDI or 2EDi family can drive it without excessive cross-conduction delay.
Package and mounting — surface-mount constraints
The PG-TO252-3 (DPak) is a surface-mount package with a large tab for heat transfer to the PCB.
Lifecycle and compliance — active production, no obsolescence pressure
The IKD15N60RFATMA1 is listed as Active in production. There is no last-time-buy notice or NRND flag on this part. It is ROHS3 compliant, so it meets the current EU and global restriction requirements for lead and other substances. For a BOM line that needs a 600 V, 30 A surface-mount IGBT, this part is a stable, long-term selection without imminent end-of-life risk.