Infineon TrenchStop® IGBT, IKD06N60RFATMA1, Trench Field Stop, 600 V, 12 A, 100 W, 48 nC, Surface Mount, TO-252-3, -40°C to 175°C.
| Parameter | Value |
|---|---|
| Series | TrenchStop® |
| IGBT type | Trench Field Stop |
| Input type | Standard |
| Mounting | Surface Mount |
| Voltage - collector emitter breakdown | 600 V |
| Current - collector (Ic) | 12 A |
| Current - collector pulsed | 18 A |
| Power - max | 100 W |
| Operating temperature | -40°C ~ 175°C (TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Gate charge | 48 nC |
| Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Test condition | 400V, 6A, 23Ohm, 15V |
| Switching energy | 90µJ (on), 90µJ (off) |
| Td (on/off) @ 25°C | 7ns/106ns |
| Vce(on) (Max) @ vge, ic | 2.5V @ 15V, 6A |
| Reverse recovery time | 48 ns |
It uses a Trench Field Stop structure for low conduction and switching losses, with a typical on-state voltage of 2.5 V at 6 A and 15 V gate drive.
The part is supplied in a TO-252-3 (DPak) surface-mount package, supplier device code PG-TO252-3. The tab is the collector terminal, so PCB layout must account for the exposed pad.
It is ROHS3 compliant.
It uses a surface-mount TO-252-3 (DPak) package, specifically the PG-TO252-3 supplier device package.
The maximum collector-emitter saturation voltage is 2.5 V at 15 V gate drive and 6 A collector current.
The IHW30N120R5XKSA1 is a higher-voltage (1200 V), higher-current (30 A) through-hole TrenchStop IGBT in a different package class, not a direct pin-compatible replacement for the surface-mount IKD06N60RFATMA1.
This part is available to order through independent distribution. Submit an RFQ for current pricing and lead time.