Skip to main content
Infineon Technologies FM25V01A-GTR — Memory (DRAM / SRAM / Flash / EEPROM)

Cypress FM25V01A-GTR FRAM 128Kbit SPI 40MHz 8SOIC

MPNFM25V01A-GTR
Active

Cypress F-RAM™ FM25V01A-GTR, 128Kbit FRAM, SPI interface, 40 MHz clock, 2V–3.6V supply, 8-SOIC package, -40°C to 85°C.

$5.7900Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesF-RAM™
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

FM25V01A-GTR specifications
ParameterValue
SeriesF-RAM™
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2V ~ 3.6V
Clock frequency40 MHz
Memory interfaceSPI
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR) Cut Tape (CT)
TechnologyFRAM (Ferroelectric RAM)
Memory size128Kbit
Memory formatFRAM
Case8-SOIC (0.154\", 3.90mm Width)
Memory organization16K x 8

Product details

The Cypress FM25V01A-GTR is a 128Kbit non-volatile FRAM (Ferroelectric RAM) memory organized as 16K x 8 bits, communicating over an SPI bus at up to 40 MHz. FRAM technology combines the fast write speed and endurance of SRAM with the non-volatility of Flash — writes are effectively instantaneous and unlimited (10^14 cycles typical), with no write-page buffers or erase cycles. This makes it a strong fit for applications that log data frequently or need to retain configuration parameters across power cycles without the wear-leveling overhead required by EEPROM or Flash.

SPI bus at 40 MHz — timing margin and throughput

The 40 MHz SPI clock is the fastest in the F-RAM™ 128Kbit class. At this speed a 16K x 8 read or write completes in roughly 400 µs (excluding command overhead), which is orders of magnitude faster than a comparable EEPROM. The SPI interface is compatible with 3.3V microcontrollers directly — the 2V to 3.6V supply range covers both 3.3V and 2.5V logic levels without a level shifter. For a firmware engineer, this means no wait-state configuration or write-cycle polling; the memory is ready for the next operation immediately after the last clock edge.

Package and footprint — 8-SOIC

The tape-and-reel variant (GTR suffix) is the standard ordering option for volume production.

Frequently asked questions

Is FM25V01A-GTR the same as FM25V01A-G?

The FM25V01A-GTR is the tape-and-reel (TR) packaged variant of the base FM25V01A-G. The die, memory size, interface, and electrical ratings are identical; only the shipping medium differs. The GTR suffix indicates Tape & Reel packaging, while the G suffix typically denotes tube or tray.

What are the alternatives to FM25V01A-GTR?

Within the Cypress F-RAM™ family, the FM25V20A-GTR offers 2Mbit density in the same 8-SOIC package and SPI interface, while the FM24V01A-GTR uses an I²C interface at 3.4 MHz. For a higher-density SPI FRAM, the FM25VN10-G provides 1Mbit in a tube package. Outside FRAM, serial EEPROMs like the 25LC256 are common alternatives but lack the write endurance and speed of FRAM.

Is FM25V01A-GTR compatible with 3.3V microcontrollers?

Yes, the FM25V01A-GTR operates from 2V to 3.6V, which covers the 3.3V logic level directly. No level shifting is needed when connecting to a 3.3V MCU SPI port.