Skip to main content
Infineon Technologies CY8C27643-24LTXI — Microcontrollers & Processors (MCU / MPU / DSP)

Infineon CY8C27643-24LTXI PSoC1 M8C MCU, 24 MHz, 16 KB Flash

MPNCY8C27643-24LTXI
Active

Infineon PSOC®1 CY8C27xxx series, CY8C27643, M8C 8-Bit MCU, 24 MHz, 16 KB FLASH, 44 I/O, I²C/SPI/UART/USART, 4x14b ADC, 4x9b DAC, 48-QFN, -40°C to 85°C.

$7.97Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

CY8C27643-24LTXI specifications
ParameterValue
SeriesPSOC®1 CY8C27xxx
Oscillator typeInternal
Program memory typeFLASH
MountingSurface Mount
Operating temperature high-40°C to 85°C (TA)
Cpu_coreM8C
Frame_size8-Bit
Fuse_speed24 MHz
ConnectivityI²C, SPI, UART/USART
Package_typeTray
Number of i (O)44
StatusActive
Data convertersA/D 4x14b; D/A 4x9b
Peripheral_typesPOR, PWM, WDT
Supply voltage3.0

Product details

16 KB Flash, 24 MHz M8C — the PSoC1 mixed-signal sweet spot

The Infineon CY8C27643-24LTXI is an 8-bit PSoC1 microcontroller from the CY8C27xxx family, built around the proprietary M8C core running at 24 MHz. This is the mixed-signal tier of the PSoC1 lineup — the headline differentiator is the integrated data converter block: a 4-channel 14-bit ADC and a 4-channel 9-bit DAC, letting you handle analog sensor inputs and generate analog control outputs without an external converter IC.

44 I/O with I²C, SPI, UART — wired for sensor aggregation

The 44 I/O count is generous for a 48-pin package — only four pins are consumed by power and ground, leaving the rest configurable as digital I/O or analog inputs. On-chip peripherals include POR, PWM, and WDT, so external supervisor or watchdog ICs can be omitted in many applications.

Frequently asked questions

What is the difference between CY8C27643-24LTXI and CY8C27643-24PVXI?

The CY8C27643-24LTXI comes in a 48-pin QFN package (surface-mount, tray), while the CY8C27643-24PVXI is a 48-pin SSOP variant. The die, memory, and peripheral set are identical — the choice is purely footprint and assembly process. The QFN offers a smaller board footprint and better thermal performance through the exposed pad; the SSOP is easier to hand-solder and inspect.

Is CY8C27643-24LTXI compatible with 5V?

No. The supply voltage is 3.0 V nominal. The I/O pins are not 5V-tolerant, so interfacing with 5V logic requires level translation or an external buffer. Check the absolute maximum ratings in the datasheet before connecting to 5V rails.

What is the programming interface for CY8C27643-24LTXI?

The PSoC1 family uses a proprietary ISSP (In-System Serial Programming) protocol over two dedicated pins. Infineon's PSoC Programmer software and a MiniProg3 or compatible programmer handle the interface. The internal oscillator is used during programming, so no external clock is required.