Skip to main content
Infineon Technologies CY27H010-45WMB — Memory (DRAM / SRAM / Flash / EEPROM)

Cypress CY27H010-45WMB EPROM, 1Mbit, 45 ns, 32CDIP

MPNCY27H010-45WMB
End of Life

Cypress CY27H010-45WMB, 1Mbit UV-erasable EPROM, 128K x 8 parallel interface, 45 ns access time, 4.5 V supply, 32CDIP ceramic through-hole, -55°C to 125°C military temperature range.

$120.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

CY27H010-45WMB Technical Specifications
ParameterValue
Interface_typeParallel
Mounting_typeThrough Hole
Operating temperature high-55°C to 125°C(TA)
Frame_size1Mbit
Access time45 ns
Memory_typeNon-Volatile
Package_typeBulk
Memory formatEPROM
Supply_voltage_v4.5
Memory organization128K x 8

Product details

1 Mbit UV-erasable EPROM — 45 ns, military temp, ceramic DIP

The Cypress CY27H010-45WMB is a 1 Mbit UV-erasable EPROM organized as 128 K × 8 bits, accessed over a parallel interface with a 45 ns access time. It operates from a 4.5 V supply and is housed in a 32-lead ceramic DIP (32CDIP) for through-hole mounting. Rated for the full military temperature range of -55°C to 125°C, this part is built for avionics, missile guidance, satellite, and downhole instrumentation where commercial or industrial temperature parts cannot survive.

45 ns access time — bus timing fit

45 ns access time matches the spec table. Verify the memory controller's timing budget before committing the BOM line.

UV-erasable EPROM: no field updates possible

This is a UV-erasable EPROM, not an EEPROM or Flash. Firmware is programmed at the factory or in a development programmer using a UV eraser — there is no in-circuit reprogramming. Once the code is locked, every unit carries the same image. If your design requires field updates or bootloader flexibility, this is the wrong memory technology.

Ceramic 32CDIP — high-reliability package

The 32-lead ceramic DIP (32CDIP) provides a hermetic seal that protects the die from moisture and contaminants — essential for long-life missions in sealed or vacuum environments. Through-hole mounting offers mechanical robustness for high-shock and high-vibration installations typical of military and aerospace hardware.

Sourcing and lifecycle reality

Production status is flagged as end-of-life (EOL), and the part is sourced through independent distribution channels — not factory-direct. Availability and pricing are confirmed at quote time against an RFQ. For dual-sourcing or when the Cypress line is tight, the 5962-8961415QXA is a pin-compatible second source sharing the same 1 Mbit, 45 ns, 128 K × 8, parallel, 4.5 V, -55°C to 125°C, 32CDIP specifications.

Frequently asked questions

What is the closest functional second-source for CY27H010-45WMB?

The 5962-8961415QXA is a pin-compatible second source with identical specs: 1 Mbit, 45 ns, 128 K × 8, parallel, 4.5 V, -55°C to 125°C, 32CDIP. It drops in without rewiring.

Will CY27H010-45WMB drop into a panel specified around 5962-8961415QXA?

Yes — the two parts share the same memory organization, access time, supply voltage, temperature range, and 32CDIP package. No board or wiring changes are needed.