Infineon Technologies PROFET® Automotive, AEC-Q100 high-side power switch, BTT60501ERAXUMA1, 4.5 A, 50 mOhm, 5-36 V, 14-SOIC exposed pad, PG-TDSO-14-11.
| Parameter | Value |
|---|---|
| Series | Automotive, AEC-Q100, PROFET® |
| Input type | Non-Inverting |
| Output type | N-Channel |
| Switch type | General Purpose |
| Mounting type | Surface Mount |
| Voltage - load | 5V ~ 36V |
| Voltage - supply (Vcc (Vdd)) | Not Required |
| Current - output | 4.5A |
| Number of outputs | 1 |
| Interface | On/Off |
| Operating temperature | -40°C ~ 150°C (TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Rds on | 50mOhm |
| Case | 14-SOIC (0.154\", 3.90mm Width) Exposed Pad |
| Fault protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output configuration | High Side |
| Ratio - Input:Output | 1:1 |
The BTT60501ERAXUMA1: The 4.5 A max continuous output is specified at the package level; the actual current limit is determined by the thermal impedance of the PCB copper and the exposed pad layout.
The input is a simple On/Off logic signal (non-inverting, 1:1 ratio); no external Vcc supply is required because the gate drive is self-supplied from the load voltage.