Skip to main content
Infineon Technologies BSP742TXUMA1 — Logic ICs
Infineon Technologies

Infineon BSP742TXUMA1 miniPROFET High-Side Switch, 260 mOhm

MPNBSP742TXUMA1
End of Life

Infineon miniPROFET® BSP742TXUMA1, high-side power switch, N-channel, 1:1 input:output, 260 mOhm typical Rds(on), 5V to 34V load, 800mA max output, PG-DSO-8-6 package, -40°C to 150°C junction temperature.

$1.8Ref. price · indicative, final on quote
BSP742TXUMA1 datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BSP742TXUMA1 Technical Specifications
ParameterValue
SeriesminiPROFET®
Input typeNon-Inverting
Output typeN-Channel
Switch typeGeneral Purpose
Mounting typeSurface Mount
Voltage - load5V ~ 34V
Voltage - supply (Vcc (Vdd))Not Required
Current - output800mA
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C ~ 150°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
Rds on260mOhm
Case8-SOIC (0.154\", 3.90mm Width)
Fault protectionCurrent Limiting (Fixed), Over Temperature, Over Voltage
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

Active high-side switch with integrated protection

The Infineon BSP742TXUMA1 is a single-channel N-channel high-side power switch from the miniPROFET® family, designed for general-purpose on/off switching of resistive, inductive, and capacitive loads. It integrates current limiting, over-temperature, and over-voltage fault protection, making it suitable for rugged 12V and 24V automotive and industrial environments where a simple On/Off interface is sufficient. The 260 mOhm typical Rds(on) keeps conduction losses manageable for loads up to 800 mA continuous.

Load voltage range and thermal capability

Rated for a load supply from 5 V to 34 V, the BSP742TXUMA1 covers 5 V logic rails, 12 V automotive battery lines, and 24 V industrial bus voltages without needing an external Vcc supply — the device is self-powered from the load pin.

Package and footprint

No external Vcc pin simplifies the layout — the switch is driven directly by a logic-level On/Off signal on the input pin.

Frequently asked questions

What is the Rds(on) for BSP742TXUMA1?

The typical Rds(on) for the BSP742TXUMA1 is 260 mOhm. This on-resistance determines the conduction loss at a given load current — at 800 mA the voltage drop is about 208 mV, which is factored into the load budget.

What are the fault protection features of BSP742TXUMA1?

The BSP742TXUMA1 integrates current limiting (fixed), over-temperature shutdown, and over-voltage protection. These protections guard the switch and the load against short circuits, thermal runaway, and supply transients without external clamp diodes.