Skip to main content
Infineon Technologies BSL207SPH6327XTSA1
Infineon Technologies

Infineon BSL207SPH6327XTSA1 P-Ch MOSFET, 20 V, 6 A, 41 mOhm

MPNBSL207SPH6327XTSA1
End of Life

Infineon OptiMOS BSL207SPH6327XTSA1, P-Channel MOSFET, 20 V Vdss, 6 A Id, 41 mOhm Rds(on) at 4.5 V, PG-TSOP6-6 package, -55 to 150 °C.

$0.72Ref. price · indicative, final on quote
BSL207SPH6327XTSA1 datasheet
PackagingSOT-23-6 Thin, TSOT-23-6
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BSL207SPH6327XTSA1 Technical Specifications
ParameterValue
SeriesOptiMOS™
FET typeP-Channel
Mounting typeSurface Mount
Drain to source voltage20 V
Drive voltage (Max rds on, min rds on)2.5V, 4.5V
Current - continuous drain (Id) @ 25°C6A (Ta)
Power dissipation2W (Ta)
Operating temperature-55°C ~ 150°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
Vgs±12V
TechnologyMOSFET (Metal Oxide)
CaseSOT-23-6 Thin, TSOT-23-6
Vgs(th) (Max) @ id1.2V @ 40µA
Rds on (Max) @ id, vgs41mOhm @ 6A, 4.5V
Gate charge (Qg) (Max) @ vgs20 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds1007 pF @ 15 V

Product details

P-channel load switch for 12 V and below

The BSL207SPH6327XTSA1: It is built for low-side load switching, battery reverse-polarity protection, and power-rail OR-ing in 5 V and 12 V systems where a P-channel simplifies the drive — no charge pump needed.

41 mOhm Rds(on) at 4.5 V gate drive

On-resistance is 41 mOhm max at 4.5 V gate drive and 6 A drain current. Dissipation at 6 A is within the 2 W package limit.

20 nC gate charge and 1007 pF input capacitance

Total gate charge is 20 nC at 10 V gate drive — a moderate figure for a 6 A P-channel in a TSOT-23-6 package. The input capacitance Ciss is 1007 pF at 15 V drain-source. For a 100 kHz switching regulator, the gate-drive current needed is about 2 mA; the Miller plateau is manageable with a standard MOSFET driver. The 20 V Vdss ceiling keeps this part out of 24 V and 48 V rails — it belongs on 3.3 V, 5 V, or 12 V buses.

ROHS3 compliant. Package is thin SOT-23-6 (PG-TSOP6-6), sharing the same footprint as standard SOT-23-6.

Frequently asked questions

What is the price and availability of BSL207SPH6327XTSA1?

Buyers need to make a quick purchasing decision based on cost and stock levels to avoid production delays.

What are the key specifications of BSL207SPH6327XTSA1?

Design engineers must confirm technical parameters like voltage, current, and Rds(on) to ensure fit in the circuit.

Is BSL207SPH6327XTSA1 obsolete or active?

Lifecycle status determines long-term availability and risk of end-of-life for both new designs and replacements.

What is the equivalent or replacement for BSL207SPH6327XTSA1?

Sourcing buyers and maintenance techs need alternate parts when the original is out of stock or for cross-compatibility.

Where can I buy BSL207SPH6327XTSA1?

Directs buyers to authorized distributors to ensure genuine parts and fast delivery.

What is the pinout of BSL207SPH6327XTSA1?

Essential for PCB layout and debugging; wrong pin connection can cause failure.