Skip to main content
Log in
Infineon Technologies BCR553E6327HTSA1 — Discrete Semiconductors

BCR553E6327HTSA1 PNP Pre-Biased Transistor, 50 V, 500 mA

MPNBCR553E6327HTSA1
Last Buy

Infineon BCR553E6327HTSA1 PNP pre-biased transistor, 50 V collector-emitter breakdown, 500 mA collector current, 150 MHz transition frequency, 330 mW power dissipation, SOT-23 package, Tape & Reel.

$0.0736Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BCR553E6327HTSA1 specifications
ParameterValue
MountingSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)500 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce40 @ 50mA, 5V
Power - max330 mW
Frequency - transition150 MHz
PackageTape & Reel (TR)
CaseTO-236-3, SC-59, SOT-23-3
Resistor - base (R1)2.2 kOhms
Resistor - emitter base (R2)2.2 kOhms
Vce saturation (Max) @ ib, ic300mV @ 2.5mA, 50mA

Product details

Pre-biased PNP for space-constrained switching

The Infineon BCR553E6327HTSA1 is a PNP pre-biased transistor in a SOT-23 package, integrating two 2.2 kOhm resistors (R1 and R2) to reduce external component count in digital switching and interface circuits. Typical applications include relay drivers, lamp drivers, and general-purpose load switching where board space is tight.

Last Buy — final procurement window

Once the last-time-buy window closes, availability will shift to surplus and broker channels. If your BOM still specifies this order code, secure inventory now or qualify a replacement before the cutoff.

For a BOM line using this pre-biased PNP, the key fit parameters are the 50 V VCEO and 500 mA Ic rating — sufficient for low-side switching of small relays, solenoids, or indicator loads in 12 V and 24 V industrial systems. The integrated bias resistors (2.2 kOhm base, 2.2 kOhm emitter-base) set the turn-on threshold and eliminate two external passives, saving placement cost.

Frequently asked questions

Is BCR553E6327HTSA1 obsolete?

This part is in Last Buy status, meaning the manufacturer has initiated end-of-life. Final orders are being accepted for a limited window; after that, supply will come from surplus and broker channels only.

What is the maximum collector current of BCR553?

The maximum collector current (Ic) is 500 mA.

What is the replacement for BCR553E6327HTSA1?

For a pin-compatible alternative, review other PNP pre-biased transistors in the BCR553 family (base product number BCR553) with the same SOT-23 package and 2.2 kOhm bias resistors, or contact our sourcing desk for cross-reference assistance.