Skip to main content
Log in
Infineon Technologies BCR198E6327HTSA1 — Discrete Semiconductors

BCR198E6327HTSA1 PNP Pre-Biased Transistor, 50V 100mA SOT-23

MPNBCR198E6327HTSA1
Last Buy

Infineon BCR198E6327HTSA1 PNP pre-biased transistor, 50 V VCEO, 100 mA Ic, 190 MHz fT, 47 kΩ integrated base and emitter-base resistors, SOT-23-3 package, 200 mW power dissipation.

$0.3500Ref. price · indicative, final on quote
Infineon Technologies BCR198E6327HTSA1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BCR198E6327HTSA1 specifications
ParameterValue
MountingSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)100 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce70 @ 5mA, 5V
Power - max200 mW
Frequency - transition190 MHz
PackageTape & Reel (TR); Cut Tape (CT)
CaseTO-236-3, SC-59, SOT-23-3
Resistor - base (R1)47 kOhms
Resistor - emitter base (R2)47 kOhms
Vce saturation (Max) @ ib, ic300mV @ 500µA, 10mA

Product details

PNP pre-biased transistor with integrated resistors

It integrates both a 47 kΩ base resistor (R1) and a 47 kΩ emitter-base resistor (R2), reducing external component count for switching and driver stages. Maximum power dissipation is 200 mW.

Last Buy — plan the BOM transition

This means Infineon has scheduled the end of production for this specific order code. Buyers should treat this as a heads-up to qualify a replacement or secure final lifetime buys through independent distribution while stock remains available.

SOT-23-3 — rework-friendly footprint

The SOT-23-3 (PG-SOT23) package is a standard small-signal footprint. It reworks cleanly with hot air or a fine-tipped iron — the three leads are well-spaced and the body is small enough that thermal mass is low. MSL 1 typically, so no pre-bake needed unless the reel has been open in a humid environment past the floor-life window.

Frequently asked questions

Is the BCR198E6327HTSA1 obsolete?

The BCR198E6327HTSA1 carries a Last Buy lifecycle status, meaning production is ending. It is not yet fully discontinued, but the window for manufacturer orders is closing. Source remaining inventory through independent channels while stock lasts.

What is the replacement for BCR198E6327?

For a Last Buy part like this, the typical approach is to evaluate a functionally similar pre-biased PNP transistor in the same SOT-23 package from Infineon's current portfolio, or from a second-source manufacturer. Contact us with your voltage, current, and resistor ratio requirements to identify a suitable cross.