Dual PNP pre-biased in a 6-pin SOT-363
The Infineon BCR185SH6327TR integrates two PNP pre-biased transistors in a single PG-SOT363-6-1 package, each with a built-in 10 kΩ base resistor (R1) and 47 kΩ emitter-base resistor (R2). This configuration eliminates two external resistors per channel, saving board area and reducing pick-and-place cost in switching and driver circuits. Rated for 50 V collector-emitter breakdown and 100 mA continuous collector current, with a maximum power dissipation of 250 mW. The 200 MHz transition frequency supports switching applications up to the low-MHz range.
AEC-Q101 qualification for automotive and industrial use
Listed under the Automotive, AEC-Q101 series, this part is qualified for stress-tested reliability in automotive under-hood and chassis-domain environments. The AEC-Q101 certification covers temperature cycling, high-temperature reverse bias, and humidity testing per the automotive electronics council standard.
Package and footprint notes for the PG-SOT363-6-1
The 6-VSSOP / SC-88 / SOT-363 package (Infineon code PG-SOT363-6-1) is a 2.0 mm × 2.1 mm body with 0.65 mm pin pitch. Surface-mount assembly requires standard reflow profiles for lead-free soldering; the small footprint suits dense PCB layouts in automotive ECUs, sensor modules, and portable electronics.