Skip to main content
Log in
Infineon Technologies BCR162E6327HTSA1 — Discrete Semiconductors

BCR162E6327HTSA1 PNP Pre-Biased Transistor, 50 V, 100 mA

MPNBCR162E6327HTSA1
Obsolete

Infineon BCR162E6327HTSA1, PNP - Pre-Biased, 50 V VCEO, 100 mA IC, 200 mW, 200 MHz, SOT-23-3, PG-SOT23, Tape & Reel.

$0.0474Ref. price · indicative, final on quote
Infineon Technologies BCR162E6327HTSA1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BCR162E6327HTSA1 specifications
ParameterValue
MountingSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)100 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce20 @ 5mA, 5V
Power - max200 mW
Frequency - transition200 MHz
PackageTape & Reel (TR)
CaseTO-236-3, SC-59, SOT-23-3
Resistor - base (R1)4.7 kOhms
Resistor - emitter base (R2)4.7 kOhms
Vce saturation (Max) @ ib, ic300mV @ 500µA, 10mA

Product details

PNP pre-biased transistor with integrated bias resistors

It integrates two 4.7 kOhm resistors — one in series with the base (R1) and one between the base and emitter (R2) — which eliminates the need for external bias components in switching and driver circuits. With a transition frequency of 200 MHz, it handles low-speed switching and signal conditioning in industrial control, consumer electronics, and general-purpose interface circuits.

For BOM lines that still require this exact order code, procurement is limited to the surplus and broker channel.

Frequently asked questions

What is the direct replacement for BCR162E6327HTSA1?

A functionally similar pre-biased PNP transistor with the same resistor values (4.7 kOhm base and emitter-base) and SOT-23 package may serve as a substitute, but pin compatibility and electrical ratings must be verified against the specific application.

Can I use a generic PNP transistor as a replacement for BCR162E6327HTSA1?

A generic PNP transistor lacks the integrated 4.7 kOhm base and emitter-base resistors. Using one requires adding two external resistors to replicate the bias network, which increases component count and board area. For a drop-in replacement, a pre-biased transistor with the same resistor values and SOT-23 footprint is the better choice.