Skip to main content
Log in
Infineon Technologies BCR135E6433HTMA1 — Discrete Semiconductors

BCR135E6433HTMA1 NPN Pre-Biased Transistor, 50V 100mA

MPNBCR135E6433HTMA1
Obsolete

Infineon BCR135E6433HTMA1 NPN pre-biased transistor, Automotive Grade, AEC-Q101 qualified, 50 V Vce, 100 mA Ic, 150 MHz ft, PG-SOT23 package, Tape & Reel.

$0.0474Ref. price · indicative, final on quote
Infineon Technologies BCR135E6433HTMA1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BCR135E6433HTMA1 specifications
ParameterValue
MountingSurface Mount
FET typeNPN - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)100 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce70 @ 5mA, 5V
Power - max200 mW
Frequency - transition150 MHz
GradeAutomotive
PackageTape & Reel (TR)
QualificationAEC-Q101
CaseTO-236-3, SC-59, SOT-23-3
Resistor - base (R1)10 kOhms
Resistor - emitter base (R2)47 kOhms
Vce saturation (Max) @ ib, ic300mV @ 500µA, 10mA

Product details

Automotive-grade pre-biased NPN — what the ratings mean

The built-in bias resistors — 10 kOhms base (R1) and 47 kOhms emitter-base (R2) — eliminate two external passives from the BOM, saving placement cost and board area in high-volume ECU modules. Collector-emitter breakdown is rated at 50 V, with a maximum collector current of 100 mA and power dissipation of 200 mW. The 150 MHz transition frequency is adequate for switching loads up to the low-MHz range, typical for relay drivers, solenoid pre-drivers, and logic-level interface circuits in 12 V automotive environments.

Supplied in a PG-SOT23 (TO-236-3, SC-59, SOT-23-3) package, surface-mount only. The three-pin footprint matches standard SOT-23 land patterns. No exposed pad; thermal dissipation relies on the package body and PCB copper.

Frequently asked questions

What is the replacement for BCR135E6433HTMA1?

For a pin-compatible pre-biased NPN in SOT-23 with the same resistor ratio (10 kOhm base / 47 kOhm emitter-base), evaluate Infineon's current BCR135 series variants or a cross from Nexperia (PDTC series) or Rohm (DTC series) — verify AEC-Q101 grade and package compatibility before substituting.

Is BCR135E6433HTMA1 AEC-Q101 qualified?

Yes, it carries AEC-Q101 qualification, making it suitable for automotive applications where the part is still available through surplus or broker channels.

What package is BCR135E6433HTMA1?

PG-SOT23, also described as TO-236-3, SC-59, SOT-23-3. It is a three-lead surface-mount package.

What are the base and emitter-base resistor values?

The base resistor (R1) is 10 kOhms; the emitter-base resistor (R2) is 47 kOhms.