Skip to main content
Infineon Technologies BCR10PNH6730XTMA1 — Discrete Semiconductors
Infineon Technologies

BCR10PNH6730XTMA1 Dual Pre-Biased Transistor, 50V, 100mA

MPNBCR10PNH6730XTMA1
Last Buy

Infineon BCR10PNH6730XTMA1, 1 NPN, 1 PNP - Pre-Biased (Dual), 50V VCEO, 100mA Ic, 130MHz fT, 10kΩ / 10kΩ resistors, PG-SOT363-PO, Tape & Reel.

$0.4500Ref. price · indicative, final on quote
BCR10PNH6730XTMA1 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BCR10PNH6730XTMA1 Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET type1 NPN, 1 PNP - Pre-Biased (Dual)
Voltage - collector emitter breakdown50V
Current - collector (Ic)100mA
DC current gain (hFE) (Min) @ ic, vce30 @ 5mA, 5V
Power - max250mW
Frequency130MHz
PackageTape & Reel (TR)
Case6-VSSOP, SC-88, SOT-363
Resistor - base (R1)10kOhms
Resistor - emitter base (R2)10kOhms
Vce saturation (Max) @ ib, ic300mV @ 500µA, 10mA

Product details

Last-buy window — plan your BOM now

Infineon has marked the BCR10PNH6730XTMA1 as Last Buy. That means the manufacturer has stopped taking new orders; the remaining channel inventory and any last-time-buy allocation are what's left. If this part is on your BOM, the decision is immediate: buy lifetime buy quantities now, or plan a replacement qualification.

What this dual pre-biased transistor does

The BCR10PNH6730XTMA1 packs one NPN and one PNP pre-biased transistor in a single PG-SOT363-PO package. Each transistor integrates a 10kΩ base resistor (R1) and a 10kΩ base-emitter resistor (R2), so you drop two external resistors per channel — four total — from the layout. Collector-emitter breakdown is rated at 50V, continuous collector current at 100mA, and transition frequency at 130MHz. Saturation voltage is 300mV at 500µA base drive and 10mA collector current. Minimum DC current gain is 30 at 5mA, 5V. Total device dissipation is 250mW. The built-in resistors simplify switching and inverter stages in low-power motor drives, relay coil drivers, or logic-level interface circuits where board space is tight.

Package and footprint

Surface-mount in a 6-VSSOP / SC-88 / SOT-363 outline, supplied on Tape & Reel. Standard reflow profiles for a small-signal SOT package apply.

Frequently asked questions

Is BCR10PNH6730XTMA1 obsolete or still available?

Infineon lists the product status as Last Buy. That means the manufacturer is no longer accepting new orders; remaining inventory is limited. It is not yet fully discontinued, but the procurement window is closing.

What is the replacement for BCR10PNH6730XTMA1?

With a Last Buy status, the common approach is to qualify a functionally equivalent dual pre-biased transistor from another supplier or move to discrete resistors plus a standard dual NPN/PNP pair. We can help search alternative parts against an RFQ.

What is the difference between BCR10PN and BCR10PNH6730XTMA1?

BCR10PN is the base product number for the family. The BCR10PNH6730XTMA1 suffix specifies the exact packaging variant — Tape & Reel and the PG-SOT363-PO package. Electrically they are the same die.

What package is BCR10PNH6730XTMA1?

It is supplied in Tape & Reel packaging. The device package is a 6-VSSOP / SC-88 / SOT-363, with the supplier designation PG-SOT363-PO.