Dual pre-biased transistor in a SOT-363
The Infineon BCR08PNH6327XTSA1 packs one NPN and one PNP pre-biased transistor into a single SOT-363 package, with integrated bias resistors R1 of 2.2kΩ and R2 of 47kΩ. This saves board space and component count in switching and driver stages where each transistor needs a base resistor and a base-emitter resistor. Typical applications include inverter outputs, relay drivers, and logic-level interface circuits where the 50V collector-emitter breakdown and 100mA continuous collector current handle small-signal loads.
Last Buy — plan the BOM transition
Infineon has placed the BCR08PNH6327XTSA1 into Last Buy status. That means the final production window is closing — orders are accepted only for a limited time, and after that the part is gone from the factory channel. If you have an active BOM using this dual transistor, now is the time to secure lifetime buy quantities or qualify a drop-in replacement.
Rework and handling on a small SOT-363
The SOT-363 (SC-88, 6-VSSOP) is a compact 6-lead package with a 1.25 mm body width. It reflows well under standard lead-free profiles, and the exposed pad is absent — all dissipation goes through the leads. Keep the hot-air temperature under 300°C and the nozzle small; the part is light and can wander if the airflow is too high.