Skip to main content
Infineon Technologies BCR 569 E6327 — Discrete Semiconductors
Infineon Technologies

Infineon BCR 569 E6327 PNP Pre-Biased Transistor, 500 mA

MPNBCR 569 E6327
Obsolete

Infineon BCR 569 E6327, PNP - Pre-Biased, 500 mA Ic, 50 V Vce, 150 MHz fT, 330 mW, PG-SOT23, Tape & Reel.

$0.3100Ref. price · indicative, final on quote
BCR 569 E6327 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BCR 569 E6327 Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)500 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce120 @ 50mA, 5V
Power - max330 mW
Frequency150 MHz
PackageTape & Reel (TR)
CaseTO-236-3, SC-59, SOT-23-3
Resistor - base (R1)4.7 kOhms
Vce saturation (Max) @ ib, ic300mV @ 2.5mA, 50mA

Product details

The Infineon BCR 569 E6327 is a PNP pre-biased transistor — a digital transistor with a built-in 4.7 kOhm base resistor (R1), designed for simple switched-load applications where a microcontroller GPIO directly drives the base. It handles up to 500 mA collector current and a 50 V collector-emitter breakdown, so it suits medium-power loads like relays, solenoids, small DC motors, and indicator LEDs in industrial controls, automotive body modules, and white goods. The 150 MHz transition frequency is adequate for PWM switching up to tens of kilohertz.

The BCR 569 E6327 carries an Obsolete product status. For new designs, select a current PNP pre-biased transistor in the same SOT-23 footprint.

The 500 mA collector current rating sets the maximum continuous load this transistor can switch — enough for a small relay or a string of LEDs, but not for a motor drive or power supply. The 50 V Vce breakdown gives headroom on a 12 V or 24 V supply rail. The 330 mW power dissipation limit in the PG-SOT23 package means derating is needed at elevated ambient temperatures; at 85 °C ambient the allowable dissipation drops to roughly 200 mW.

Frequently asked questions

What is the replacement for BCR 569 E6327?

Infineon has not published a direct successor for the BCR 569 E6327. For a pin-compatible alternative, look for a PNP pre-biased transistor in a SOT-23 package with a 4.7 kOhm base resistor and similar current/voltage ratings — for example, the BCR 135 (also PNP pre-biased, but with different resistor values) is a common cross-shop candidate, though the resistor network differs.

Where can I buy BCR 569 E6327?

Submit an RFQ for current availability and pricing — quotes are confirmed at order time.

What are the specifications of BCR 569 E6327?

It is a PNP pre-biased transistor with 500 mA collector current, 50 V Vce breakdown, 150 MHz transition frequency, 4.7 kOhm base resistor, 330 mW power dissipation, and a PG-SOT23 package.

BCR 569 vs BCR 135 – what is the difference?

Both are PNP pre-biased transistors in SOT-23, but the BCR 569 uses a single 4.7 kOhm base resistor (R1), while the BCR 135 typically integrates a resistor divider (e.g., 10 kOhm base, 10 kOhm base-emitter). The BCR 569 also has a higher 500 mA collector current rating versus the BCR 135's 100 mA. Check the specific resistor values and current needs before substituting.