Skip to main content
Infineon Technologies BCR 199F E6327 — Discrete Semiconductors
Infineon Technologies

BCR 199F E6327 PNP Pre-Biased Transistor, 50 V, 70 mA

MPNBCR 199F E6327
End of Life

Infineon BCR 199F E6327 PNP pre-biased transistor, 50 V Vce, 70 mA Ic, 200 MHz ft, 47 kΩ base resistor, SOT-723 surface-mount package, Tape & Reel.

BCR 199F E6327 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BCR 199F E6327 Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)70 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce120 @ 5mA, 5V
Power - max250 mW
Frequency200 MHz
PackageTape & Reel (TR)
CaseSOT-723
Resistor - base (R1)47 kOhms
Vce saturation (Max) @ ib, ic300mV @ 500µA, 10mA

Product details

PNP pre-biased transistor for low-side switching

The Infineon BCR 199F E6327 is a PNP pre-biased transistor in a SOT-723 surface-mount package. The 50 V collector-emitter breakdown and 70 mA continuous collector current suit it for low-side switching of small inductive loads, relay coils, or LED strings in 24 V industrial or 48 V telecom auxiliary rails.

SOT-723 footprint and thermal budget

The SOT-723 (PG-TSFP-3) package is one of the smallest three-lead packages available, roughly 1.2 mm × 1.2 mm. That saves board area but limits dissipation to 250 mW. For a 70 mA load with a 300 mV Vce(sat) at 500 µA base drive, the on-state dissipation is about 21 mW, well within the budget. If you need to switch near the 70 mA limit continuously, keep the ambient below 85 °C or derate the current.

For a spare-parts storeroom, this means you can order production quantities without worrying about a sudden cut-off.

Frequently asked questions

What is the closest pin-compatible alternative to BCR 199F E6327?

Infineon's BCR 199 series includes several pre-biased PNP transistors in SOT-723 with different base resistor values. The BCR 199F uses a 47 kΩ base resistor; other variants (e.g., BCR 199S with 10 kΩ) are pin-compatible but change the base-drive current. Check the resistor value against your drive voltage before substituting.