Skip to main content
Infineon Technologies BCR 153T E6327 — Discrete Semiconductors
Infineon Technologies

Infineon BCR 153T E6327 PNP Pre-Biased Transistor, 100 mA

MPNBCR 153T E6327
End of Life

Infineon BCR 153T E6327 PNP pre-biased transistor, SC-75 SOT-416 surface-mount, 100 mA collector current, 50 V Vce, 2.2 kΩ internal base and emitter resistors, 200 MHz transition frequency, 250 mW power dissipation.

BCR 153T E6327 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BCR 153T E6327 Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)100 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce20 @ 20mA, 5V
Power - max250 mW
Frequency200 MHz
PackageTape & Reel (TR)
CaseSC-75, SOT-416
Resistor - base (R1)2.2 kOhms
Resistor - emitter base (R2)2.2 kOhms
Vce saturation (Max) @ ib, ic300mV @ 1mA, 20mA

Product details

Pre-biased PNP in a tiny SC-75 — what it saves you

The BCR 153T E6327: The Infineon BCR 153T is a PNP pre-biased transistor in the SC-75 (SOT-416) surface-mount package. It integrates two 2.2 kΩ resistors—one in series with the base, one from base to emitter—so you drop two external passives per transistor. Collector current is rated 100 mA maximum, with a collector-emitter breakdown of 50 V. Saturation voltage is 300 mV at 1 mA base drive into 20 mA collector load. The 200 MHz transition frequency keeps switching edges clean in low-speed logic translation or relay-driver circuits.

Mounting and handling notes

The SC-75 package is small, so the solder-paste stencil aperture and reflow profile need attention to avoid tombstoning. The part ships in Tape & Reel (TR), ready for pick-and-place.

Frequently asked questions

What is the pinout of BCR 153T E6327?

Design engineers need to confirm pin alignment for PCB layout to avoid incorrect connections.

Is BCR 153T E6327 obsolete or still active?

Buyers and brokers need to know if the part is end-of-life to plan for last-time buys or alternative sourcing.

Where can I buy BCR 153T E6327 and what is the lead time?

Purchasing agents need stock availability and lead time to manage production schedules and BOM fulfillment.

What are the equivalent replacements for BCR 153T E6327?

Cross-reference is critical when the exact part is out of stock or obsoleted, enabling substitution with minimal redesign.

What is the maximum collector current (Ic) of BCR 153T E6327?

Design engineers must verify the part meets the circuit's current requirements to prevent failure.

What is the package and footprint of BCR 153T E6327?

Surface mount assembly and footprint matching are essential for proper soldering and mechanical fit.