Skip to main content
Infineon Technologies BCR 103F E6327 — Discrete Semiconductors
Infineon Technologies

Infineon BCR 103F E6327 NPN Pre-Biased Transistor, 100 mA

MPNBCR 103F E6327
End of Life

Infineon BCR 103F E6327 NPN pre-biased transistor, 100 mA collector current, 50 V V(BR)CEO, 2.2 kΩ base and emitter-base resistors, 140 MHz transition frequency, SOT-723 surface-mount package.

BCR 103F E6327 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BCR 103F E6327 Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET typeNPN - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)100 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce20 @ 20mA, 5V
Power - max250 mW
Frequency140 MHz
PackageTape & Reel (TR)
CaseSOT-723
Resistor - base (R1)2.2 kOhms
Resistor - emitter base (R2)2.2 kOhms
Vce saturation (Max) @ ib, ic300mV @ 1mA, 20mA

Product details

Two resistors you don't need to place

The BCR 103F E6327: NPN pre-biased transistor with two 2.2 kΩ bias resistors integrated into the SOT-723 package. Collector current is rated to 100 mA, collector-emitter breakdown to 50 V, and transition frequency to 140 MHz.

Saturation headroom at 20 mA

Vce(sat) is specified at 300 mV maximum with a 1 mA base drive into a 20 mA collector load — a clean saturation voltage that keeps dissipation low in a 250 mW package. The DC current gain minimum is 20 at 20 mA, 5 V, which is typical for a pre-biased part where the resistor divider sets the on-state base current. Off-state leakage is 100 nA maximum, so it will not ghost-load a pull-up in a high-impedance node.

Active, not going anywhere

Infineon still runs this part, so the supply channel is the standard distribution route.

Frequently asked questions

What is the maximum collector current for the BCR 103F E6327?

The maximum continuous collector current (Ic) is 100 mA. The part is rated for loads up to that level; derate for ambient temperature and power dissipation in the SOT-723 package.