Skip to main content
Infineon Technologies BC 807-25 B5003 — Discrete Semiconductors

BC 807-25 B5003 PNP Transistor, 45 V, 500 mA, SOT-23

MPNBC 807-25 B5003
Obsolete

Infineon BC 807-25 B5003 PNP transistor, 45 V Vce breakdown, 500 mA collector current, 200 MHz transition frequency, 330 mW power dissipation, SOT-23-3 package, surface mount.

$0.1600Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BC 807-25 B5003 specifications
ParameterValue
MountingSurface Mount
FET typePNP
Voltage - collector emitter breakdown45 V
Current - collector (Ic)500 mA
Current - collector cutoff100nA (ICBO)
DC current gain (hFE) (Min) @ ic, vce160 @ 100mA, 1V
Power - max330 mW
Frequency - transition200MHz
Operating temperature150°C (TJ)
PackageTape & Reel (TR) Cut Tape (CT)
CaseTO-236-3, SC-59, SOT-23-3
Vce saturation (Max) @ ib, ic700mV @ 50mA, 500mA

Product details

PNP switching transistor in SOT-23

The Infineon BC 807-25 B5003 is a general-purpose PNP bipolar transistor rated for 45 V collector-emitter breakdown and 500 mA continuous collector current, in a surface-mount SOT-23-3 package (PG-SOT23). With a 200 MHz transition frequency and a saturation voltage of 700 mV at 50 mA base drive and 500 mA collector current, it suits medium-speed switching and linear amplification in low-power circuits.

Buyers should confirm date-code freshness and verify against the original Infineon datasheet for the BC 807-25 grade (hFE range 160–400 at 100 mA).

Key ratings for the design

The 45 V Vce breakdown and 500 mA Ic rating place this transistor in the medium-voltage, medium-current class — suitable for relay drivers, LED switching, and general-purpose signal amplification below 500 mA. The 700 mV Vce(sat) at full rated current is typical for a PNP of this size, but the designer should budget the saturation drop when calculating load voltage at low supply rails. Maximum power dissipation is 330 mW, which in the SOT-23 package limits continuous current to roughly 200–300 mA at 25 °C ambient depending on derating.

Frequently asked questions

What is the replacement for BC 807-25 B5003?

Since the part is obsolete, engineers and buyers need a direct replacement to avoid redesign.

Is BC 807-25 B5003 obsolete?

Confirms product lifecycle status so buyers can plan sourcing or switch to alternatives.

Where to buy BC 807-25 B5003?

Buyers need active distributors or last-time-buy sources for this obsolete part.

What are the specifications of BC 807-25 B5003?

Design engineers need to validate fit in circuits (Vce, Ic, package).

What is the pinout of BC 807-25 B5003?

Techs replacing a failed unit need correct pin assignment for SOT-23.

Can I use BC807-25 as a replacement for BC807-16?

Brokers and buyers check compatibility between suffix variants of the same base number.