Skip to main content
Log in
Infineon Technologies BAS 40-07 E6327 — Discrete Semiconductors

Infineon BAS 40-07 E6327 Schottky Diode, 40 V, 120 mA

MPNBAS 40-07 E6327
Active

Infineon BAS 40-07 E6327, Schottky Diode, 2 Independent, 40 V Vr, 120 mA Io, 1 V Vf @ 40 mA, 100 ps trr, Surface Mount, PG-SOT-143-3D.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BAS 40-07 E6327 specifications
ParameterValue
Diode typeSchottky
MountingSurface Mount
Voltage - DC reverse (Vr)40 V
Voltage - forward (Vf) (Max) @ if1 V @ 40 mA
Current - reverse leakage @ vr1 µA @ 30 V
Current - average rectified (Io) (per diode)120mA (DC)
Operating temperature - junction150°C(Max)
SpeedSmall Signal =< 200mA (Io), Any Speed
PackageBulk
CaseTO-253-4, TO-253AA
Diode configuration2 Independent
Reverse recovery time100 ps

Product details

Dual Schottky in a four-pin SOT-143

The Infineon BAS 40-07 E6327 is a dual Schottky diode with two independent junctions in a single PG-SOT-143-3D surface-mount package. Each diode is rated for a maximum reverse voltage of 40 V and an average rectified current of 120 mA.

Forward voltage and leakage — the real-world tradeoffs

Reverse leakage is 1 µA at the 30 V reverse bias point, which is modest; at elevated junction temperatures (the device is rated to 150 °C max) leakage will climb, so budget headroom if the diode sits near a hot regulator or power stage.

The PG-SOT-143-3D is a four-lead SOT-143 variant. That pinout is standard for this dual-Schottky configuration, so layout and replacement are predictable.

Frequently asked questions

Can BAS 40-07 replace BAT54?

BAS 40-07 and BAT54 are both small-signal Schottky diodes in SOT-23 or similar packages, but the BAS 40-07 has a 40 V reverse voltage rating versus 30 V for BAT54, and a 120 mA average current versus 200 mA for BAT54. The pinout and package differ — BAS 40-07 uses SOT-143 with a common-cathode dual configuration, while BAT54 is often a single diode or dual in SOT-23. Check your board footprint and electrical requirements before substituting.