The Infineon BAS 16-02W E6327 is a small-signal switching diode in a standard silicon technology, rated for a DC reverse voltage up to 80 V and an average rectified forward current of 200 mA, with a reverse recovery time of 4 ns. It comes in the SC-80 (SCD-80) surface-mount package, designed for high-speed switching applications where board space is tight. Typical uses include signal clamping, flyback snubbing, and general-purpose switching in low-power circuits across industrial and consumer electronics.
Obsolete — plan your BOM replacement now
Buyers should identify a pin-compatible switching diode from the same or an equivalent family and qualify it for their design before inventory runs dry.
Key ratings — 80 V, 200 mA, 4 ns trr
The 80 V maximum DC reverse voltage gives headroom for 48 V and 60 V bus rails with derating. The 200 mA average forward current covers low-side logic loads and signal-line protection. The 4 ns reverse recovery time keeps switching losses low in circuits operating above 100 kHz. Junction temperature rating goes to 150 °C, which suits the device for ambient environments up to 85 °C with moderate self-heating.
SC-80 package — footprint and layout
The BAS 16-02W E6327 is supplied in the SC-80 plastic package, also designated SCD-80. It is a surface-mount, two-terminal device intended for reflow soldering. The small body requires careful stencil design and solder-paste volume control to avoid bridging.