Active production — no end-of-life risk for this BOM line
The 1EDC60I12AHXUMA1: RoHS3 compliance (EU 2015/863) is confirmed on the manufacturer's documentation, covering the full substance restriction list without exemptions.
2500Vrms isolation — what it means for your gate-drive design
The magnetic coupling technology delivers 2500Vrms galvanic isolation between input and output, certified per the device's basic insulation rating. This is the isolation barrier that protects low-voltage control logic from the high-side floating supply in a half-bridge or full-bridge topology — the 2500Vrms figure is the one-hour withstand voltage, not a transient rating. Output supply range of 13V to 35V covers the typical gate-drive voltages for IGBTs (15V) and SiC MOSFETs (18-20V), with headroom for bootstrap capacitor charging. The single-channel configuration drives one high-side or low-side switch per package. 10ns typical rise time and 9ns typical fall time at the output keep switching losses low in the MHz-range hard-switching converters common in server PSUs and EV onboard chargers. The propagation delay matching between channels is not specified here — for multi-channel designs, pair this part with a matched sibling.
Temperature grade and package — board-fit constraints
The 150°C TJ max allows operation in engine-bay or under-hood environments where ambient air reaches 105°C and the self-heating from gate-drive current adds another 20-30°C.