Analog Devices OP27GSZ-REEL general-purpose op-amp, 8 MHz gain-bandwidth product, 2.8 V/µs slew rate, 30 µV input offset, 8-SOIC surface-mount package, tape and reel.
| Parameter | Value |
|---|---|
| Mounting type | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 30 µV |
| Voltage - supply span | 36 V |
| Current - input bias | 15 nA |
| Operating temperature | -40°C ~ 85°C |
| Gain bandwidth product | 8 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 2.8V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
The OP27GSZ-REEL: Supplied on tape and reel (also available in cut tape), the packaging suits volume production runs and prototype builds alike.
Analog Devices lists the OP27GSZ-REEL as Active — no end-of-life notices or last-time-buy windows are in effect, so the part remains available for both existing designs and new builds. Fully RoHS3 compliant, meeting EU Directive 2015/863 without exemptions.
The gain-bandwidth product is 8 MHz, and the slew rate is 2.8 V/µs. These figures define the small-signal bandwidth ceiling and the large-signal response limit respectively.
No — the AD8599ARZ-REEL7 is a dual-channel op-amp with a 10 MHz GBW and 16 V/µs slew rate, while the OP27GSZ-REEL is a single-channel device. The pinouts differ, so a board spin is required.
The typical input offset voltage is 30 µV, which supports DC-accurate amplification in precision measurement circuits.