What this dual op-amp is and where it fits
The Analog Devices OP200GSZ-REEL is a dual general-purpose operational amplifier in a 16-SOIC package. It delivers a gain-bandwidth product of 500 kHz and a slew rate of 0.15 V/µs, with a supply current of 570 µA per channel. The input offset voltage is trimmed to 80 µV, and the input bias current sits at 100 pA. It operates from a single or split supply spanning 6 V to 36 V, over the industrial temperature range of -40°C to 85°C. Typical applications include sensor signal conditioning, active filters, and low-power instrumentation where a moderate bandwidth and low offset are needed — common on industrial control boards, data-acquisition front-ends, and battery-powered field instruments.
Key ratings and what they mean on the bench
The 500 kHz gain-bandwidth product sets the usable closed-loop gain bandwidth. The 0.15 V/µs slew rate limits the large-signal response. The 80 µV input offset voltage is low enough that most designs skip external nulling. Supply current of 570 µA per channel keeps the thermal budget modest. The 100 pA input bias current suits high-impedance sources.
Package and ordering options
The OP200GSZ-REEL is supplied in a 16-SOIC wide-body package (7.50 mm width) on Tape & Reel, with Cut Tape also available for smaller quantities. The surface-mount footprint matches standard SOIC-16 land patterns. If you need a single reel or a few pieces for a repair, the Cut Tape option avoids the full-reel minimum.