Skip to main content
Analog Devices OP113ESZ — Discrete Semiconductors
Analog Devices

OP113ESZ General Purpose Op-Amp, 3.4 MHz, 1.2 V/µs, 8-SOIC

MPNOP113ESZ
End of Life

Analog Devices OP113ESZ, General Purpose Amplifier, 1 Circuit, 8-SOIC (0.154", 3.90mm Width), Surface Mount, Tube, -40°C ~ 85°C.

$10.69Ref. price · indicative, final on quote
OP113ESZ datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

OP113ESZ Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset75 µV
Voltage - supply span36 V
Current - supply3mA
Current - input bias240 nA
Current - output (Channel)40 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product3.4 MHz
PackageTube
Slew rate1.2V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Single-supply precision op-amp for industrial signal chains

The Analog Devices OP113ESZ is a single-channel general-purpose operational amplifier in an 8-SOIC package, specified for industrial temperature range (-40°C to 85°C). It delivers a gain-bandwidth product of 3.4 MHz and a slew rate of 1.2 V/µs, with a maximum input offset voltage of 75 µV and input bias current of 240 nA. Supply current is 3 mA per amplifier, and the output can source or sink 40 mA. The part operates from a single supply spanning 4 V to 36 V, making it suitable for industrial control loops, sensor front-ends, and data-acquisition signal conditioning where a moderate bandwidth and low DC error are required.

75 µV offset — where it earns its place on the BOM

The 75 µV maximum input offset voltage is the headline precision spec. In a weigh-scale or bridge amplifier, that offset translates directly to a DC error at the output.

Package and mounting

Supplied in a Tube of 8-SOIC (0.154", 3.90 mm width) packages, surface-mount. The 8-SOIC footprint is standard for single op-amps; no special land pattern needed.

Lifecycle and sourcing

ADI lists the OP113ESZ as Active and ROHS3 compliant. For a BOM freeze or a new design, this part carries no imminent obsolescence risk.

Frequently asked questions

What is the OP113ESZ equivalent?

Within the same performance tier, the ADA4077-1ARZ-R7 is a functional peer with a lower input offset voltage (15 µV vs 75 µV) and wider temperature range (-40°C to 125°C), but its output current is lower (22 mA vs 40 mA). The AD8675ARMZ offers rail-to-rail output and 10 MHz GBW, but at a higher supply current. Neither is a drop-in replacement — verify the pinout and compensation before substituting.

What is the difference between OP113ESZ and OP113ES?

The OP113ESZ suffix indicates ROHS3 compliance and a Tube package. The OP113ES (non-Z) may be non-ROHS or packaged differently. Check the specific order code for environmental compliance and packaging details.