Skip to main content
Analog Devices OP02EP — Memory (DRAM / SRAM / Flash / EEPROM)

OP02EP General Purpose Op Amp, 1.3 MHz, 0.5V/µs, 8-DIP

MPNOP02EP
End of Life

Analog Devices OP02EP, General Purpose Amplifier, 1 Circuit, 8-DIP (0.300", 7.62mm), Through Hole, Bulk, 1.3 MHz Gain Bandwidth, 0.5V/µs Slew Rate, -55°C to 125°C.

$3.42Ref. price · indicative, final on quote
Packaging8-DIP (0.300", 7.62mm)
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

OP02EP specifications
ParameterValue
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span44 V
Current - input bias1 nA
Operating temperature-55°C ~ 125°C
Gain bandwidth product1.3 MHz
PackageBulk
Slew rate0.5V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

It delivers a gain-bandwidth product of 1.3 MHz and a slew rate of 0.5 V/µs, making it a workhorse for signal conditioning, active filters, and control loops in environments that demand the full military temperature range of -55°C to 125°C. The wide supply span from 10 V to 44 V lets it run off common industrial rails or split supplies without a secondary regulator.

Slew rate and bandwidth — the signal chain fit

At 0.5 V/µs slew rate and 1.3 MHz gain-bandwidth, the OP02EP handles audio-frequency signals and slow control loops cleanly.

Input offset and bias — DC accuracy

Frequently asked questions

Is there a direct replacement or equivalent for the OP02EP?

No official direct replacement or second-source alternate is listed by the manufacturer. The AD640BD is a logarithmic amplifier, not a general-purpose op amp, so it is not a functional equivalent. Any substitute would need to be qualified by the user for pin-compatibility and performance.