Maxim Integrated MAX9271GTJ+, GMSL Serializer, 16-bit, 1.5 Gbps, LVCMOS input, CML output, 1.7V-3.6V supply, -40°C to 105°C, 32-TQFN (5x5 mm), Tube.
| Parameter | Value |
|---|---|
| Input type | LVCMOS |
| Output type | CML |
| Mounting | Surface Mount |
| Voltage | 1.7V ~ 3.6V |
| I/O channels | 16 |
| Operating temperature | -40°C ~ 105°C (TA) |
| Package | Tube |
| Function | Serializer |
| Data rate | 1.5Gbps |
| Case | 32-WFQFN Exposed Pad |
At 1.5 Gbps, this serializer can transport 1080p30 video with embedded control data over a single coax or STP pair. The 16-bit parallel input width matches typical CMOS image sensor outputs. The CML output drives the cable directly.
No end-of-life notice has been issued.
Housed in a 32-TQFN (5x5 mm) with exposed pad for thermal relief.
Yes, the MAX9271GTJ+ serializer is designed to pair with the MAX9281 deserializer over a GMSL link. Both parts share the same serial protocol and support coaxial or STP cable.
With proper cable and termination, the 1.5 Gbps CML output supports cable runs up to approximately 15 meters over coaxial or STP. Actual reach depends on cable quality and the deserializer's equalization.
Lead time is confirmed at quote time against an RFQ. As an active part available through independent distribution, typical lead times are quoted per order quantity and current factory backlog.
Yes. The CML output is specified for driving coaxial cable as well as shielded-twisted-pair. The GMSL protocol is designed for single-coax video links.